JOURNAL METRICS

Impact Factor (JCR) 2023: 0.7 ℹImpact Factor (JCR):

The JCR provides quantitative tools for ranking, evaluating, categorizing, and comparing journals. The impact factor is one of these; it is a measure of the frequency with which the “average article” in a journal has been cited in a particular year or period. The annual JCR impact factor is a ratio between citations and recent citable items published. Thus, the impact factor of a journal is calculated by dividing the number of current year citations to the source items published in that journal during the previous two years.

5-Year Impact Factor: 0.8 ℹ5-Year Impact Factor:

A 5-Year Impact Factor shows the long-term citation trend for a journal. This is calculated differently from the Journal Impact Factor, so it is not simply an average of the Impact Factors in the time period. The Impact Factor itself is based only on Web of Science Core Collection citation data from the last three years and thus reflects only recent impact. The Journal Impact Factor is the average number of times articles from the journal published in the past two years have been cited in the Journal Citation Reports year.

CiteScore 2023: 1.6 ℹCiteScore:

CiteScore is the number of citations received by a journal in one year to documents published in the three previous years, divided by the number of documents indexed in Scopus published in those same three years.

SCImago Journal Rank (SJR) 2023: 0.217 ℹSCImago Journal Rank (SJR):

The SJR is a size-independent prestige indicator that ranks journals by their 'average prestige per article'. It is based on the idea that 'all citations are not created equal'. SJR is a measure of scientific influence of journals that accounts for both the number of citations received by a journal and the importance or prestige of the journals where such citations come from It measures the scientific influence of the average article in a journal, it expresses how central to the global scientific discussion an average article of the journal is.

Source Normalized Impact per Paper (SNIP) 2023: 0.429 ℹSource Normalized Impact per Paper (SNIP):

SNIP measures a source’s contextual citation impact by weighting citations based on the total number of citations in a subject field. It helps you make a direct comparison of sources in different subject fields. SNIP takes into account characteristics of the source's subject field, which is the set of documents citing that source.

qqtu_pian_20240428144739.png

Archive

Sizing of Thermal Storage Under the Eco-Exergetic Operation Optimization for District Energy Networks: Application to a Real Case Study in Italy

Nicola Bianco, Marialaura Di Somma, Giorgio Graditi, Luigi Mongibello

https://doi.org/10.18280/ijht.420601

Page 1841-1848

PDF Full-text HTML Full-text Citation

OPEN ACCESS

Free Convection inside Greenhouse Cavity Partially Filled with Bottom Porous Layer: The Influence of Soil's Porosity and Permeability

Chihab Eddine Brahmi, Mouna Maache Battira, Nourredine Belghar, Mahmoud Kalfali, Zied Driss

https://doi.org/10.18280/ijht.420602

Page 1849-1858

PDF Full-text HTML Full-text Citation

OPEN ACCESS

The Application of Thermodynamic Analysis in Assessing the Efficiency and Cost-Effectiveness of Biomass Energy Conversion

Meng Shang, Lulu Shi, Junwei Cao

https://doi.org/10.18280/ijht.420603

Page 1859-1869

PDF Full-text HTML Full-text Citation

OPEN ACCESS

The Effect of Heat Treatment (T62) on the Tensile Shearing Test of Explosively Welded Layered Material AA2519-AA1050-Ti6Al4V

Maciej Kotyk, Łukasz Brych

https://doi.org/10.18280/ijht.420604

Page 1870-1878

PDF Full-text HTML Full-text Citation

OPEN ACCESS

Performance of a VCR System with Variable Capillary Tube Geometry and R134a Refrigerant Charge Through Forced Convection at Various Air Velocities

Mansour Al-Tuaysi, Eyad Al-Suhaibani, Naif Al-Mansoor, M. Shameer Basha

https://doi.org/10.18280/ijht.420605

Page 1879-1886

PDF Full-text HTML Full-text Citation

OPEN ACCESS

Comparative Study of Hydration Kinetics in Binary and Ternary Cements Using the Avrami Model

Lila Kerrai, Samir Ladjali, Samira Tebani

https://doi.org/10.18280/ijht.420606

Page 1887-1900

PDF Full-text HTML Full-text Citation

OPEN ACCESS

Enhancement the Performance of FPSC by Utilizing Hybrid Nanofluids - An Extended Review

Karrar A. Al-Shibli, Ahmed Kadhim Hussein

https://doi.org/10.18280/ijht.420607

Page 1901-1910

PDF Full-text HTML Full-text Citation

OPEN ACCESS

Development of an Anomaly Detection Model for Bridge Vibration Acceleration under Temperature Variations and Investigation of Thermodynamic Mechanisms

Jiting Zhan, Kui Hu, Chao Xue

https://doi.org/10.18280/ijht.420608

Page 1911-1923

PDF Full-text HTML Full-text Citation

OPEN ACCESS

Effect of Pyrolysis Temperature on the Properties of Biochar Derived from Melinjo Seed Shells

Ali Rahmat, Annisa Saadatul Awwaliyah, Hidayat Hidayat, Ivone Wulandari Budiharto, Fera Arum, Santi Ari Respati, Wiwiek Dwi Susanti, Sukamto Sukamto

https://doi.org/10.18280/ijht.420609

Page 1924-1934

PDF Full-text HTML Full-text Citation

OPEN ACCESS

Study the Effect of Inclination in Micro Fluidization Beds on Hydrodynamics Parameters

Huda Ridha

https://doi.org/10.18280/ijht.420610

Page 1935-1940

PDF Full-text HTML Full-text Citation

OPEN ACCESS

Impact of Synchronous Condenser Thermodynamic Performance on Power Grid Frequency Stability

Shuang Wang, Xiaohui Chang, Liguo Wang, Lei Zhang, Manshuai Wang, Jiahui Wang

https://doi.org/10.18280/ijht.420611

Page 1941-1951

PDF Full-text HTML Full-text Citation

OPEN ACCESS

Effect of Twist Ratios on Heat Transfer for Circular-Cut Twisted Tape Inserts in U-Shaped Pipe

Md. Moniruzzaman Bhuyan, Mashky Chowdhury Surja, Ujjwal Kumar Deb

https://doi.org/10.18280/ijht.420612

Page 1952-1962

PDF Full-text HTML Full-text Citation

OPEN ACCESS

Enhancing Indoor Air Quality and Thermal Comfort with a Ventilated Built-In Closet Design

Georges Khedari, Preeda Chantawong, Thana Ananacha

https://doi.org/10.18280/ijht.420613

Page 1963-1968

PDF Full-text HTML Full-text Citation

OPEN ACCESS

The Impact of Traditional Architectonic Characters on the Environmental and Thermal Condition of Houses: A Case Study of Erbil, Kurdistan, Iraq

Joan Atheel Ahmed, Wardah Fatimah Mohammad Yusoff, Mohd Farid Mohamed

https://doi.org/10.18280/ijht.420614

Page 1969-1982

PDF Full-text HTML Full-text Citation

OPEN ACCESS

Application of Thermodynamic Methods in Enhancing the Antibacterial Performance of Textile Materials

Peng Li, Lianyuan Liu, Jian Sun, Yuhuan Zhao, Xiaofei Shang

https://doi.org/10.18280/ijht.420615

Page 1983-1993

PDF Full-text HTML Full-text Citation

OPEN ACCESS

Exploring Experimentally Al₂O₃ Nanoparticles Impact on a Four-Stroke Diesel Engine's Performance and Emissions

Safaa A. Ghadhban, Hussein Al-Gburi, Isbeyeh W. Maid

https://doi.org/10.18280/ijht.420616

Page 1994-2000

PDF Full-text HTML Full-text Citation

OPEN ACCESS

The Mass Transfer Coefficient of Pseudapocryptes Elongatus Fish Dried in a Hot Air Dryer

Luan Nguyen Thanh

https://doi.org/10.18280/ijht.420617

Page 2001-2007

PDF Full-text HTML Full-text Citation

OPEN ACCESS

Refined Assessment of Thermodynamic Effects of Urban Green Spaces Based on GIS Technology and Optimization of Their Layout Strategy

Shuang Lu, Lei Kong, Yi Liu, Qian Zhang, Dan Zhang, Mengjing Wang

https://doi.org/10.18280/ijht.420618

Page 2008-2018

PDF Full-text HTML Full-text Citation

OPEN ACCESS

Experimental Investigation on the Effects of Wall Chamber Insulation on Nusselt Number and Heat Loss Reduction in a Natural Convection Oven

Frank Agyen Dwomoh, Randy Amuaku, Edward Ampaw, Godwin Kwasi Amanor, Fehrs Adu Gyamfi

https://doi.org/10.18280/ijht.420619

Page 2019-2026

PDF Full-text HTML Full-text Citation

OPEN ACCESS

Study on the Numerical Investigation of the Natural Convection of an Elliptical Enclosure with a Hot Curved Triangular-Shaped in Different Orientation

Nawar S.A. Bakly, Nagham Yass Khudair, Sami Muhsen, Hayder K. Rashid

https://doi.org/10.18280/ijht.420620

Page 2027-2038

PDF Full-text HTML Full-text Citation

OPEN ACCESS

Advancement of a Cascade Refrigeration System for Enhanced Blood Plasma Preservation

Olarewaju T. Oginni, Bukola B. Bolaji, Adedotun O. Adetunla, Chan Choon Kit

https://doi.org/10.18280/ijht.420621

Page 2039-2046

PDF Full-text HTML Full-text Citation

OPEN ACCESS

Thermodynamic Properties of the Interface in Carbon Fiber/Epoxy Resin Matrix Composites: A Molecular Dynamics Simulation Approach

Li Ji, Weiping Zhang, Ying Liu, Hong Zhang, Meiling Sun

https://doi.org/10.18280/ijht.420622

Page 2047-2057

PDF Full-text HTML Full-text Citation

OPEN ACCESS

Alternative Use of MJ2955 Transistor as a Substitute for Solar Panels in Simple Power Plants

Rombe Allo, Selyus Rantepulung, Allo Sarira Pongsapan, Samuel P. Siregar, Enos Tambing, Oktavianus Kati, Joni

https://doi.org/10.18280/ijht.420623

Page 2058-2066

PDF Full-text HTML Full-text Citation

OPEN ACCESS

Energy and Exergy Analysis of Thermoelectric Generator Installed on Diesel Engine Exhaust Heat Recovery System

Hayder Noori Mohammed, Murtdha S. Imran, Hayder J. Kurji

https://doi.org/10.18280/ijht.420624

Page 2067-2074

PDF Full-text HTML Full-text Citation

OPEN ACCESS

Thermodynamic Performance and Lifetime Prediction Model of High-Voltage Transmission Lines in High Temperature and High Humidity Environments

Wei Cui

https://doi.org/10.18280/ijht.420625

Page 2075-2084

PDF Full-text HTML Full-text Citation

OPEN ACCESS

The Assessment of Temperature-Energy Interaction for Consecutive Discharge Heat Storage Tank Using Composite Solid-Liquid MHSS

Danies Seda Yuseva, Muchammad, Sulistyo, Syaiful, Reza Abdu Rahman

https://doi.org/10.18280/ijht.420626

Page 2085-2091

PDF Full-text HTML Full-text Citation

OPEN ACCESS

Heat Transfer Analysis of Environment-Friendly Refrigerants Using Conventional and Minichannel Condensers in Versatile Refrigeration Systems

Vijay W. Bhatkar, Dhiresh S. Shastri, Girish L. Allampallewar, Sumod K. Pawar

https://doi.org/10.18280/ijht.420627

Page 2092-2098

PDF Full-text HTML Full-text Citation

OPEN ACCESS

Thermodynamic Analysis in the Microscopic Structural Characterization of Civil Engineering Materials

Huifang Hou

https://doi.org/10.18280/ijht.420628

Page 2099-2107

PDF Full-text HTML Full-text Citation

OPEN ACCESS

A Numerical Study to Improve Heat Transfer in a Rectangular Cell Filled with Phase Change Materials Using Several Types of Rods

Ali K. Jasim, Sabah H. Alwan, Ahmed K. Nemah, Hasan Qahtan Hussein, Karrar A. Hammoodi

https://doi.org/10.18280/ijht.420629

Page 2108-2114

PDF Full-text HTML Full-text Citation

OPEN ACCESS

Analysis of the Impact of Different Fin Configurations as Passive Coolants on Photovoltaic Performance

Khoirul Basyar, Zainal Arifin, Dominicus Danardono Dwi Prija Tjahjana, Singgih Dwi Prasetyo

https://doi.org/10.18280/ijht.420630

Page 2115-2124

PDF Full-text HTML Full-text Citation

OPEN ACCESS

Experimental and Simulation Study on Heat Accumulation Phenomenon at the Bottom of Solid Thermal Storage Electric Boilers

Yichao Wang, Sai Liu, Yiwei Yang, Fenfei Qiao, Yong Sun

https://doi.org/10.18280/ijht.420631

Page 2125-2133

PDF Full-text HTML Full-text Citation

OPEN ACCESS

Hybrid Coatings for Wood Protection Against Fire Action

Riyam Hamed Kadhim, Ammar Emad Al-Kawaz

https://doi.org/10.18280/ijht.420632

Page 2134-2142

PDF Full-text HTML Full-text Citation

OPEN ACCESS

Numerical Simulation and Comparative Analysis of Earth Air Heat Exchanger Designs

Mustapha Merdassi, Mokhtar Aouissi

https://doi.org/10.18280/ijht.420633

Page 2143-2156

PDF Full-text HTML Full-text Citation

OPEN ACCESS

Validation and Refinement of Fluid Dynamics Models for Vacuum Pressure Relief Valves Based on Data Analysis

Lili Shi, Zhiliang Xia

https://doi.org/10.18280/ijht.420634

Page 2157-2163

PDF Full-text HTML Full-text Citation

OPEN ACCESS

Enhancement of Heat Transfer Characteristics by Inserted Novel Turbulators in Circular Tube Heat Exchanger

Hisham A. Hoshi, Hussain Saad Abd, Farhan Lafta Rashid, Awesar A. Hussain

https://doi.org/10.18280/ijht.420635

Page 2164-2172

PDF Full-text HTML Full-text Citation

OPEN ACCESS

Comparative Analysis of Electrode Performance and Thermal Treatments in SMAW of Dissimilar Metal Joints

Mohammed D. Hamdey, Ahmed Hashim Kareem, Bashar Mahmood Ali, Muhammad Asmail Eleiwi, Hasan Shakir Majdi, Mohammed M. Aldabbagh

https://doi.org/10.18280/ijht.420636

Page 2173-2184

PDF Full-text HTML Full-text Citation

OPEN ACCESS

Optimization of Office Ventilation Strategies Using the FLUENT Component Transport Model: A Numerical Simulation Approach

Bin Zhang, Yin Liu, Shaoxiong Zhang

https://doi.org/10.18280/ijht.420637

Page 2185-2192

PDF Full-text HTML Full-text Citation

OPEN ACCESS

Numerical Investigation on the Effect of Burner Inclination Angle on Methane-Air Combustion in Multi-Regime Burner

Ganamatayya Kallayya Hikkimath, Devendra Kumar Patel

https://doi.org/10.18280/ijht.420638

Page 2193-2206

PDF Full-text HTML Full-text Citation

OPEN ACCESS