JOURNAL METRICS

Impact Factor (JCR) 2024: 1.3 ℹImpact Factor (JCR):

The JCR provides quantitative tools for ranking, evaluating, categorizing, and comparing journals. The impact factor is one of these; it is a measure of the frequency with which the “average article” in a journal has been cited in a particular year or period. The annual JCR impact factor is a ratio between citations and recent citable items published. Thus, the impact factor of a journal is calculated by dividing the number of current year citations to the source items published in that journal during the previous two years.

5-Year Impact Factor: 1.1 ℹ5-Year Impact Factor:

A 5-Year Impact Factor shows the long-term citation trend for a journal. This is calculated differently from the Journal Impact Factor, so it is not simply an average of the Impact Factors in the time period. The Impact Factor itself is based only on Web of Science Core Collection citation data from the last three years and thus reflects only recent impact. The Journal Impact Factor is the average number of times articles from the journal published in the past two years have been cited in the Journal Citation Reports year.

CiteScore 2024: 2.0 ℹCiteScore:

CiteScore is the number of citations received by a journal in one year to documents published in the three previous years, divided by the number of documents indexed in Scopus published in those same three years.

SCImago Journal Rank (SJR) 2024: 0.250 ℹSCImago Journal Rank (SJR):

The SJR is a size-independent prestige indicator that ranks journals by their 'average prestige per article'. It is based on the idea that 'all citations are not created equal'. SJR is a measure of scientific influence of journals that accounts for both the number of citations received by a journal and the importance or prestige of the journals where such citations come from It measures the scientific influence of the average article in a journal, it expresses how central to the global scientific discussion an average article of the journal is.

Source Normalized Impact per Paper (SNIP) 2024: 0.783 ℹSource Normalized Impact per Paper (SNIP):

SNIP measures a source’s contextual citation impact by weighting citations based on the total number of citations in a subject field. It helps you make a direct comparison of sources in different subject fields. SNIP takes into account characteristics of the source's subject field, which is the set of documents citing that source.

CURRENT ISSUE

Vol. 35, No. 4, August 2025

Effect of Al₂O₃ Particle Size on Mechanical Properties of Al-12%Si Alloy via Taguchi Method

Farah Ammar Ibrahim, Zeyad D. Kadhim, Mohammed Abdulraoof Abdulrazzaq, Abdelhedi Aydi

https://doi.org/10.18280/rcma.350401

Page 601-608

PDF Full-text HTML Full-text Citation

OPEN ACCESS

Application of Artificial Neural Network for Parameters Optimization on Tensile Properties via Hand Lay-up Techniques for Kenaf/Fibreglass Reinforced Hybrid Composite

Syakir Hakimi Zainulabidin, Suriani Mat Jusoh, Samsuri Abdullah

https://doi.org/10.18280/rcma.350402

Page 609-618

PDF Full-text HTML Full-text Citation

OPEN ACCESS

Effect of Initial Saturation Level on Leaching and Permeability of Treated Gyoseous Soil

Israa S. Hussein, Naser A. Hassan, Mahmood Gazey Jassam

https://doi.org/10.18280/rcma.350403

Page 619-628

PDF Full-text HTML Full-text Citation

OPEN ACCESS

Influence of Gas Flow Rate on the Structural and Optical Properties of TiO₂ Prepared by Plasma Jet Technique

Mohammed Kh. Ibrahim, Bilal K. Al-Rawi

https://doi.org/10.18280/rcma.350404

Page 629-634

PDF Full-text HTML Full-text Citation

OPEN ACCESS

Modifying the Properties of Granulated Blast Furnace Slag Mortar to Adhere to International Standards

Mohammed Ali Abdulrehman, Ibrahim Abdulwahhab Atiyah, Ahmed S. Abbas, Ali Abed Salman, Akram Q. Moften, Ahmed Hafedh Mohammed Mohammed

https://doi.org/10.18280/rcma.350405

Page 635-642

PDF Full-text HTML Full-text Citation

OPEN ACCESS

Development and Characterization of Antibacterial Polymer Blends Composed of PVA, PAAm, and PEG Integrated with Carbon Nanotubes

Khansaa Saleem Sharba, Akeel Shakir Alkelaby, Khalid Haneen Abass

https://doi.org/10.18280/rcma.350406

Page 643-653

PDF Full-text HTML Full-text Citation

OPEN ACCESS

Analysis of Cement Properties and Physico-Chemical Characterization of Mineral Waste: Impact of Mineral Additives on Cement Performance

Benia Mounir, Naceri Abdelghani

https://doi.org/10.18280/rcma.350407

Page 655-661

PDF Full-text HTML Full-text Citation

OPEN ACCESS

The Effect of Liquid Smoke Treatment on Sansevieria Trifasciata Laurentii Fibers on the Mechanical Properties of Composite Fiber Materials

Mukhlis Muslimin, Willy Artha Wirawan, Bambang Tjiroso, Tri Suyono, Ahmad Seng, Mohammad Muzni Harbelubun

https://doi.org/10.18280/rcma.350408

Page 663-670

PDF Full-text HTML Full-text Citation

OPEN ACCESS

Predicting the Mechanical Behavior of Cold Asphalt Mixtures Using Optimized Artificial Neural Networks

Rasha K. Mahmoud, Sarah Adnan Saeed, Anwer M. Ali, Dawod S. Ayed, Mustafa Q. Khalid

https://doi.org/10.18280/rcma.350409

Page 671-678

PDF Full-text HTML Full-text Citation

OPEN ACCESS

Ag Nanoparticles Decorated with ZnO Thin Films Synthesis via Spray Pyrolysis for Gas Sensing

Zaid Lawi. Hadi, Aneed Maher Lafta, Bahaa Fakhry Shehab

https://doi.org/10.18280/rcma.350410

Page 679-686

PDF Full-text HTML Full-text Citation

OPEN ACCESS

Integrated Performance and Sustainability Assessment of Ceramic Waste as Aggregate Substitute in Structural Concrete

Ali J. Dakhil, Oday Hashim Abbas, Talib Abdulameer Jasim, Mohammed S. Radhi, Zainab Al-Khafaji, Mayadah Falah

https://doi.org/10.18280/rcma.350411

Page 687-695

PDF Full-text HTML Full-text Citation

OPEN ACCESS

Investigation the Behavior Fibrous-RC Beams Strengthening by CFRP on Grooves with Different Compressive Strengths of Concrete

Amjed A. Maid, Mohammed A. Mashrei

https://doi.org/10.18280/rcma.350412

Page 697-707

PDF Full-text HTML Full-text Citation

OPEN ACCESS

Innovative Design and Finite Element Analysis of Wheel Rims Using Boron Epoxy Composites: A Cost-Benefit and Lifecycle Assessment for Industrial Applicability

Mustafa M. Mansour, Azhar Mansoor Salman, Alaa M. Lafta

https://doi.org/10.18280/rcma.350413

Page 709-723

PDF Full-text HTML Full-text Citation

OPEN ACCESS

Luffa Powder and Nano Clay Reinforced Composite Development and Optimization for Automobile Bumper Implementation

Temitayo M. Azeez, Humbulani S. Phuluwa, Lateef O. Mudashiru

https://doi.org/10.18280/rcma.350414

Page 725-732

PDF Full-text HTML Full-text Citation

OPEN ACCESS

Multifunctional UPE Composites Reinforced with Recycled PET/HDPE Hybrids

Saad Mushtaq Hashim, Waleed Bdaiwi

https://doi.org/10.18280/rcma.350415

Page 733-745

PDF Full-text HTML Full-text Citation

OPEN ACCESS

Optimizing Lead-Free Cs₂NaBiI₆ Perovskite Solar Cells via Mg²⁺ Doping: Enhanced Efficiency and Stability

Arkan G. Salman, Majid R. Al-Bahrani

https://doi.org/10.18280/rcma.350416

Page 747-753

PDF Full-text HTML Full-text Citation

OPEN ACCESS

Investigating the Energy Intake/Discharge Behavior of Xylitol-Based PCM with Polymer as Thermal Storage Material

Danies Seda Yuseva, Muchammad, Sulistyo, Syaiful, Reza Abdu Rahman

https://doi.org/10.18280/rcma.350417

Page 755-762

PDF Full-text HTML Full-text Citation

OPEN ACCESS

Multi-Objective Optimization for the Compressive Strength and Dimensional Accuracy of LCD Printed Parts Using Grey Relational Analysis

Mustafa Mohammed Abdulrazaq, Vian N. Najm, Athraa Mohammed S. Ahmed

https://doi.org/10.18280/rcma.350418

Page 763-770

PDF Full-text HTML Full-text Citation

OPEN ACCESS

Enhanced Photovoltaic and Optical Properties of Red Cabbage Dye Sensitized with ZnO Nanoparticles for Solar Cell Applications

Najlaa M. Hadi, Baidaa Y. Mohemed, Ibtesam O. Radi, Saja M. Hussein Ali

https://doi.org/10.18280/rcma.350419

Page 771-778

PDF Full-text HTML Full-text Citation

OPEN ACCESS

A Study on the Use of Heterocyclic Compounds for Surface Protection in Acidic Environments

Asawer S. Temma, Hanan M. Ali

https://doi.org/10.18280/rcma.350420

Page 779-790

PDF Full-text HTML Full-text Citation

OPEN ACCESS