JOURNAL METRICS

Impact Factor (JCR) 2022: 0.8 ℹImpact Factor (JCR):

The JCR provides quantitative tools for ranking, evaluating, categorizing, and comparing journals. The impact factor is one of these; it is a measure of the frequency with which the “average article” in a journal has been cited in a particular year or period. The annual JCR impact factor is a ratio between citations and recent citable items published. Thus, the impact factor of a journal is calculated by dividing the number of current year citations to the source items published in that journal during the previous two years.

5-Year Impact Factor: 0.7 ℹ5-Year Impact Factor:

A 5-Year Impact Factor shows the long-term citation trend for a journal. This is calculated differently from the Journal Impact Factor, so it is not simply an average of the Impact Factors in the time period. The Impact Factor itself is based only on Web of Science Core Collection citation data from the last three years and thus reflects only recent impact. The Journal Impact Factor is the average number of times articles from the journal published in the past two years have been cited in the Journal Citation Reports year.

CiteScore 2023: 1.7 ℹCiteScore:

CiteScore is the number of citations received by a journal in one year to documents published in the three previous years, divided by the number of documents indexed in Scopus published in those same three years.

SCImago Journal Rank (SJR) 2023: 0.215 ℹSCImago Journal Rank (SJR):

The SJR is a size-independent prestige indicator that ranks journals by their 'average prestige per article'. It is based on the idea that 'all citations are not created equal'. SJR is a measure of scientific influence of journals that accounts for both the number of citations received by a journal and the importance or prestige of the journals where such citations come from It measures the scientific influence of the average article in a journal, it expresses how central to the global scientific discussion an average article of the journal is.

Source Normalized Impact per Paper (SNIP) 2023: 0.388 ℹSource Normalized Impact per Paper (SNIP):

SNIP measures a source’s contextual citation impact by weighting citations based on the total number of citations in a subject field. It helps you make a direct comparison of sources in different subject fields. SNIP takes into account characteristics of the source's subject field, which is the set of documents citing that source.

qqtu_pian_20240428144739.png

CURRENT ISSUE

Vol. 48, No. 6, December 2024

Corrosion Inhibition of Carbon Steel Using Tree Gum in 3.5% NaCl Solution

Shaker Salih Bahar, Khalid O. Alabboodi, Abbas Khaleel Ibrahim Al-Gburi, Sata Kathum Ajjam, Zainab S. Obaid

https://doi.org/10.18280/acsm.480601

Page 747-753

PDF Full-text HTML Full-text Citation

OPEN ACCESS

A Critical Review of Mechanical, Physical and Durability Properties of Slurry Infiltrated Fibrous Concrete (SIFCON)

Mohammed Ali Abdulrehman, Shah Rizal Kasim, Khalid Mershed Eweed, Khairunisak Abdul Razak

https://doi.org/10.18280/acsm.480602

Page 755-766

PDF Full-text HTML Full-text Citation

OPEN ACCESS

Study of Mechanical, Physical, and Thermal Properties of Polyester-Polyethylene Composite Materials Reinforced with Rubber Granules

Baraa Jamal Rashad, Waleed Bdaiwi

https://doi.org/10.18280/acsm.480603

Page 767-784

PDF Full-text HTML Full-text Citation

OPEN ACCESS

Numerical and Experimental Analysis for Flexure Behavior of Pyramidal Core Sandwich Composite

Karema J. Swaeh, Ahmad F. Hamzah

https://doi.org/10.18280/acsm.480604

Page 785-793

PDF Full-text HTML Full-text Citation

OPEN ACCESS

Influence of Various Heat Treatment Regimes on Properties of Concrete Incorporating Marble Waste Powder as Cement Replacement

Yasser Nacereddine Ziada, Rachid Djebien, Nadjet Bouacha

https://doi.org/10.18280/acsm.480605

Page 795-804

PDF Full-text HTML Full-text Citation

OPEN ACCESS

Modification of Glass Fiber/Epoxy Composites by Polyvinyl Alcohol (PVA) Electrospun Nanofibers

Shereen A. Abdulrahman, Alaa A. Mohammed, Mayyadah S. Abed

https://doi.org/10.18280/acsm.480606

Page 805-812

PDF Full-text HTML Full-text Citation

OPEN ACCESS

Volumetric Assessment of Hot Mix Asphalt Incorporating Petroleum Bitumen and High-Calcium Fly Ash for Binder Courses: A Case Study

Alifah D. Maghfirah, S. A. Adisasmita, M. Tumpu

https://doi.org/10.18280/acsm.480607

Page 813-822

PDF Full-text HTML Full-text Citation

OPEN ACCESS

Control of Angular Distortion in Gas Tungsten Arc Aluminum Welds Using the Back-Step Welding Procedure

Abdul Sameea Jasim Jilabi

https://doi.org/10.18280/acsm.480608

Page 823-829

PDF Full-text HTML Full-text Citation

OPEN ACCESS

Properties of Mortars Incorporating Binary and Ternary Blends of Palm Ash, Silica Fume, and Metakaolin

Athraa Hasan, Ali H. Nahhab

https://doi.org/10.18280/acsm.480609

Page 831-843

PDF Full-text HTML Full-text Citation

OPEN ACCESS

Comparative Study of Fatigue Properties in Friction Stir Welded Dissimilar Aluminium Alloys (AA5083-H111 and AA6061-T6) Using an Optimized Tool Pin Profile Versus a Standard Design Tool

Wazir Hassan Khalafe, Ewe Lay Sheng, Muna Khethier Abbass, Mohd Rashdan Bin Isa, Shazarel Bin Shamsudin

https://doi.org/10.18280/acsm.480610

Page 845-856

PDF Full-text HTML Full-text Citation

OPEN ACCESS

Interfacial Effects on Mechanical, Thermal and Electrical Properties of Polymer-Based Nanocomposites: A Review

Huda M. Khdier, Kater Alnada Faris Husham, Wafaa M. Shali, Hayder A. Al-Atabi

https://doi.org/10.18280/acsm.480611

Page 857-869

PDF Full-text HTML Full-text Citation

OPEN ACCESS

Synthesis and Characterization of Carbonate-Substituted Hydroxyapatite from Eggshell Waste Using Urea and Diammonium Hydrogen Phosphate

Raihan Annisa Fitri, Arief Wirakusuma, Muhammad Prayogie Aulia, Ratni Dewi, Nasrul Arahman

https://doi.org/10.18280/acsm.480612

Page 871-878

PDF Full-text HTML Full-text Citation

OPEN ACCESS

Comparison of a Medium Carbon Steel Microscopic and Hardness Properties Following Different Heat-Treatments

Hasan Mahmood Kaedhi, Luqman Khaleel Hyder Alatrushi, Emad Toma Karash, Mohammad Takey Elias Kassim, Jamal Nayief Sultan

https://doi.org/10.18280/acsm.480613

Page 879-886

PDF Full-text HTML Full-text Citation

OPEN ACCESS

Microstructural Evolution of NiTi-Coated Austenitic Stainless Steel Using TIG Cladding: Influence of Current Values

Abdul Sameea J. Jilabi, Huda Th. Abuhameed

https://doi.org/10.18280/acsm.480614

Page 887-898

PDF Full-text HTML Full-text Citation

OPEN ACCESS

Synergistic and Antagonistic Effects of Agro-Industrial By-Products and Sewage Sludge on Mortar Properties

Meriem Dorbani, Nacera Khaldi, Messaouda Bencheikh, Salima Bouchemella, Leila Kherraf, Houria Hebhoub, Sarra Bensoudane, Ines Seridi

https://doi.org/10.18280/acsm.480615

Page 899-906

PDF Full-text HTML Full-text Citation

OPEN ACCESS