© 2021 IIETA. This article is published by IIETA and is licensed under the CC BY 4.0 license (http://creativecommons.org/licenses/by/4.0/).
OPEN ACCESS
We demonstrate the capabilities of computational fluid dynamics (CFD) and a pressure-impulse failure model to predict blast loading and structural damage in a geometrically complex cityscape. The simulated loading is compared against experimental results for 69 g PE4 in a 1/50th scale model with wood-framed and plywood-faced buildings; data were collected from 11 pressure gauges throughout. In the initial simulation, geometric features were modeled as perfectly rigid, whereas buildings in the experiment failed: the resulting differences between the model and experiment allowed us to evaluate CFD when failure occurs. Simulated peak pressures during the first positive phase were still within 20% of experiment at most pressure gauges. However, errors in first phase impulses were around 40%, suggesting that building-failure effects are greater toward the phase end. Then, to model building-failure effects, we attempted to fit pressure-impulse failure curves to the plywood-faces: this proved too simplistic to produce realistic blast wave behavior due to the various, complex failure modes. This work illustrates key limitations of available CFD software and the pressure-impulse fail- ure model – both industry-standard tools to determine structural response to blast. We conclude that stronger coupling between blast loading and structural response is needed where significant failure occurs.
CFD, finite-volume method, severe blast problems, structural failure, validation
[1] Forth, S.A., Johnson, S., Burrows, S.J. & Sheldon, R.P., Cranfield University Centre of Excellence in Counterterrorism. Enhancing CBRNE Safety & Security: Proceedings of the SICC 2017 Conference, eds. A. Malizia & M. D’Arienzo, Springer International Publishing: Cham, pp. 317–323, 2018. https://doi.org/10.1007/978-3-319-91791-7
[2] Folkman, C., Terrorism modeling and risk management. Presented at RAA Catastrophe Modeling Conference, Orlando, USA, 2014. Online. www.slideshare.net/RMS_News/ terrorism-modeling-risk-management-presented-at-theraas-cat-modeling-confer- ence-2014. Accessed on: 5 Jan. 2018.
[3] Remennikov, A.M. & Rose, T.A., Modelling blast loads on buildings in complex city geometries. Computers & Structures, 83(27), pp. 2197–2205, 2005. https://doi. org/10.1016/j.compstruc.2005.04.003
[4] Rose, T. & Smith, P., Influence of the principal geometrical parameters of straight city streets on positive and negative phase blast wave impulses. International Journal of Impact Engineering, 27(4), pp. 359–376, 2002. https://doi.org/10.1016/S0734- 743X(01)00060-4
[5] Forth, S., ProSAir computational blast loading tool website. Cranfield University, Shrivenham, UK. www.cranfield.ac.uk/facilities/cds-prosair-computational-blast-load- ing-tool. Accessed on: 5 Jan. 2018.
[6] Rose, T.A., An Approach to the evaluation of blast loads on finite and semi-infinite structures. PhD Thesis, Cranfield University, Cranfield Defence and Security, Shriven- ham, UK, 2010. https://dspace.lib.cranfield.ac.uk/handle/1826/4262
[7] Forth, S., ProSAir 2018.4 User Guide. Cranfield Defence and Security, Cranfield Uni- versity, Shrivenham, UK, 2018.
[8] Smith, P., Rose, T. & Brittle, M., Analysis of a generic cityscape using an adaptive mesh CFD code. Proceedings of the 12th International Symposium on Interaction of the Effect of Munitions with Structures, ISIEMS: New Orleans, LA, USA, 2005.
[9] Brittle, M., Blast propagation in a geometrically complex environment. Master’s thesis, Cranfield University, Shrivenham, UK, 2004.
[10] S.J. Burrows, Forth, S. & Sheldon, R., Data for “Partial Validation of CFD Blast Sim- ulation in a Cityscape Environment Featuring Structural Failure”. Cranfield Online Research Data (CORD), 2019. http://dx.doi.org/10.17862/cranfield.rd.8175026
[11] LeVeque, R.J., Finite Volume Methods for Hyperbolic Problems. Cambridge Texts in Applied Mathematics, Cambridge University Press, 2002.
[12] UN - Safeguard, Kingery Bulmash Blast Parameter Calculator. United Nations Office for Disarmament Affairs, New York. Online. www.un.org/disarmament/un-saferguard/ kingery-bulmash/. Accessed on: 13 Sep. 2017.
[13] Smith, D. & Cormie, D., Design of glazing. Blast Effects on Buildings, eds. G. Mays, P.D. Smith & D. Cormie, Thomas Telford Ltd, pp. 177–215, 2nd edition, 2009. https:// doi.org/10.1680/beob2e.35218.0009