OPEN ACCESS
Nowadays, in different industrial fields as transport or aerospace, a research effort is conducted to reduce the structural weight. One of the most promising solutions is the use of composite structures due to their high stiffness, their low mass density and their low damping factor. At the same time, there is an intensification of the operational dynamic environment and an increase of durability requirements. These different expectations seem to be contradictory. One solution to manage these points is to design and manufacture smart composite structures with a fully distributed set of integrated piezoelectric transducers. These structures are able to modify their mechanical properties with respect to their environment (e.g. active vibration control), to interact with other structures (e.g. mechatronic) or with human beings (e.g. Human–Machine Interaction).
To meet the technical specifications of smart composite structures, in particular for complex geometries, it is necessary to master the manufacturing process and consequently the material parameters of the manufactured composite. Indeed, during the design phase, these parameters have to be absolutely known. A design approach based on engineering system theory and uncertainty calculation is applied to our manufacturing process of smart composite structures. In this paper, two different material identification methods (the Resonalyser technique and the Time-of-Flight technique) were selected and are applied to several test plates and, finally, on a large smart spherical cap. The Resonalyser technique is a good method to extract overall material parameters. Its major drawback in terms of cost and difficulty of implementation is the use of contactless devices for the measurements. The Time-of-Flight technique is based on the duration measurements of pulse propagation with a simple and low cost experimental setup. Integrated piezoelectric transducers are used for this purpose in the present analysis. The results obtained are quite local (mean values along the propagation path) and need a strong physical interpretation. The different material parameters obtained are compared and discussed.
complex structure, composite structure, material characterization, transducers integration
[1] Cheah, L.W., Cars on a diet: the material and energy impacts of passenger vehicle weight reduction in the US. PhD thesis, Massachusetts Institute of Technology, 2010.
[2] Karen, T., Technical challenges to reducing subsonic transport weight. In AIAA Aerospace Sciences Meeting, 2012.
[3] Georgios, K., Arlindo, S. & Mihail, F., Green composites: a review of adequate materials for automotive applications. Composites Part B: Engineering, 44(1), pp. 120–127, 2013. http://dx.doi.org/10.1016/j.compositesb.2012.07.004
[4] Sujit, D., Life cycle assessment of carbon fiber-reinforced polymer composites. The International Journal of Life Cycle Assessment, 16(3), pp. 268–282, 2011. http://dx.doi.org/10.1007/s11367-011-0264-z
[5] Air Resources Board. Preliminary discussion paper - amendments to California’s low-emission vehicle regulations for criteria pollutants - lev iii. Strate of California, 2010.
[6] Dessolier, T., Lachat, R. & Meyer, Y., Fibers-based composite structures with integrated piezo-ceramics. design approach of smart devices. In International Conference on Dynamics of Composite Structures (Dyncomp’2015), Arles, France, 2015.
[7] Meyer, Y. & Lachat, R., Vibration characterization procedure of piezoelectric ceramic parameters. In Proc.4eme Colloque francophone d’Analyse Vibratoire Expérimentale (AVE 14), Blois, France, 2014.
[8] Lachat, R. & Meyer, Y., Structures composites adaptatives conception et fabrication d’un aileron automobile instrumenté. In Congrès Français de Mécanique (CFM), Lyon, France, 2015.
[9] Lauwagie, T., Sol, H., Heylen, W. & Roebben, G., Determination of the in-plane elastic properties of the different layers of laminated plates by means of vibration testing and model updating. Journal of Sound and Vibration, 274(3), pp. 529–546, 2004. http://dx.doi.org/10.1016/j.jsv.2003.05.023
[10] Sol, H. & Oomens, C., Material Identification Using Mixed Numerical Experimental Methods, Kluwer Academic Publishers, 1997. http://dx.doi.org/10.1007/978-94-009-1471-1
[11] Lauwagie, T., Vibration-based methods for the identification of the elastic properties of layered materials. PhD thesis, Katholieke Universiteit Leuven, 2005.
[12] Tucker, B.J., Bender, D.A., Pollock, D.G. & Wolcott, M.P., Ultrasonic plate wave evaluation of natural fiber composite panels. Wood and Fiber Science, 35(2), pp. 266–281, 2003.
[13] Tucker, B.J., Ultrasonic Plate Waves in Wood-Based Composite Panels, PhD thesis, Washington State University, 2001.
[14] Monnier, T., Ondes de Lamb dans les milieux stratifiés: application à la surveillance in situ et en temps réel de l’endommagement de structures composites. PhD thesis, INSA de Lyon, 2001.
[15] Love, A.E.H., A Treatise on the Mathematical Theory of Elasticity, volume 1. Cambridge University Press, 1944.