OPEN ACCESS
There are some difficulties of non-destructive test and evaluation for immersed or submerged structures such as nuclear reactor pipe line, submarine or huge ship. This paper proposes the method of damage detection of immersed metallic structure which has crack on weld zone and placed in the water with slight and random surface oscillation using ultrasonic wave propagation imaging (UWPI) system with piezoelectric transducer. A T-shape metallic structure with artificial surface crack on weld zone, which with size 2 mm by 0.3 mm and the depth 2 mm, used as the specimen. A 532 nm Q-switched continuous wave laser is used for scanning an area of 20 mm by 40 mm. A piezoelectric sensor with magnetic sensor head, which is attachable to metallic structure is used as a contact ultrasonic sensor. The tests are performed in three cases: a specimen without water, a specimen immersed in water and a specimen immersed in water with random surface oscillation. Ultrasonic wave propagation image algorithm and adjacent wave subtraction (AWS) algorithm are used for visualizing wave propagation and detecting the crack. For the case where the specimen is immersed in the water, the signal amplitude is increased compared with the specimen without water case. In AWS algorithm results of the immersed case, scattering waves which are generated by cracks were observed. In random surface oscillation case, the excitation laser beam is refracted randomly by Snell’s law resulting in the diluted wave propagation images. However, improvements in signal-to-noise ratio using repeat scan technology enable to the detection of the crack and estimation of the crack size.
This paper examines the damage detection using ultrasonic wave propagation caused by laser excitation from outside of the water even when the water surface oscillation exists and implies the possibility of application of ultrasonic propagation imaging system to submerged structures.
crack damage, laser pulse scanning, repeated scanning technique, structure under oscillat- ing water, ultrasonic propagation imaging system
[1] Na, W.B. & Kundu, T., Underwater pipeline inspection using guided waves. Journal of Pressure Vessel Technology, 124(2), pp. 196–200, 2002. http://dx.doi.org/10.1115/1.1466456
[2] Chen, J., Su, Z. & Cheng, L., Identification of corrosion damage in submerged structures using fundamental anti-symmetric Lamb waves. Smart Materials and Structures, 19(1), p. 12, 2010. http://dx.doi.org/10.1088/0964-1726/19/1/015004
[3] Rizzo, P., Han, J.G. & Ni, X.L., Structural health monitoring of immersed structures by means of guided ultrasonic waves. Journal of Intelligent Material Systems and Structures, 21(14), pp. 1397–1407, 2010. http://dx.doi.org/10.1177/1045389X10384170
[4] Sharma, S. & Mukherjee, A., Ultrasonic guided waves for monitoring corrosion in submerged plates. Structural Control and Health Monitoring, 22, pp. 19–35, 2015. http://dx.doi.org/10.1002/stc.1657
[5] Chong, S.Y. & Lee, J.R., Development of laser ultrasonic propagation imaging system with twenty-kilohertz scanning frequency for nondestructive evaluation applications. Proceeding of Advances in Structural Health Management and Composite Structures, Jeonju, Korea, 1, pp. 18–21, 2014.
[6] Lee, J.R. & Sunuwar, N., Advances in damage visualization algorithm of ultrasonic propagation imaging system. Journal of the Korean Society for Nondestructive Testing, 33(2), pp. 232–240, 2013.
[7] Lee, J.R., Chia, C.C., Park, C.Y. & Jeong, H., Laser ultrasonic anomalous wave propagation imaging method with adjacent wave subtraction: algorithm. Optics & Laser Technology, 44, pp. 1507–1515, 2012. http://dx.doi.org/10.1016/j.optlastec.2011.12.008
[8] Chia, C.C., Lee, J.R., Park, C.Y. & Jeong, H., Laser ultrasonic anomalous wave propagation imaging method with adjacent wave subtraction: application to actual damages in composite wing. Optics & Laser Technology, 44, pp. 428–440, 2012. http://dx.doi.org/10.1016/j.optlastec.2011.08.007
[9] Dhital,D., Lee, J.R. & Park, C.Y., Fully non-contact laser excitation and reception ultrasonic propagation imaging system with repeat scanning technique. Proceeding of 6th European Workshop on Structural Health Monitoring, pp. 1–8, 2012.
[10] Lee, J.R., Jang, J.K. & Kong, C.W., Fully noncontact wave propagation imaging in an immersed metallic plate with a crack. Shock and Vibration, 2014, p. 8, 2014. http://dx.doi.org/10.1155/2014/895693