OPEN ACCESS
The theory of morphological indicators (MI) provides user-friendly tools guiding the structural designer towards low volume consuming solutions during the exploration and comparison of different structural types. Since a first doctoral thesis published in 1999, a decade of research has refined MI into a bench- marked structural optimisation method for conceptual design. This article surveys the milestones that lead to today’s method and contains the published references that contributed to the major evolutions of MI. The article also refers to the work of other researchers in structural and architectural engineering, this time in the quest of optimisation of structures through a more sustainable design, offering the possibility of re-use and recombination of structural components. This technique, called 4D design methodology, was based on a research proposal by Hendrickx and Van Walleghem, which was further developed at Vrije Universiteit Brussel.
4D design methodology, conceptual design, fully stressed design, morphological indicators, structural optimisation, sustainable design, volume minimisation
[1] Samyn, P., Etude comparée du volume et du déplacement de structures isostatiques bidimensionnelles sous charges verticales entre deux appuis. Vers un outil d’évaluation et de prédimensionnement des structures (4 Tomes). PhD Thesis, Université de Liège, Liège, Belgium, 1999.
[2] Vandenbergh, T., Benchmarking optimisation at conceptual design stage with morpho- logical indicators’, PhD Thesis, Vrije Universiteit Brussel, Brussels, 2010.
[3] Debacker, W., Henrotay, C., De Wilde, W.P. & Hendrickx, H., The Hendrickx– Vanwalleghem design strategy. High Performance Structures and Materials III, UK WIT Press: Ashurst, 2006.
[4] Debacker, W., Structural design and environmental load assessment of multi-use con- struction kits for temporary applications based on 4-dimensional design. PhD Thesis, Brussels University Press, Brussels, Belgium, 2009.
[5] French, M. J., Conceptual Design for Engineers. 2nd edn., The Design Council: London, 2006.
[6] Samyn, P., Etude de la morphologie des structures à l’aide des indicateurs de volume et de déplacement (3ème série), Académie Royale de Belgique, Classe des Sciences: Belgium, 2004.
[7] Maxwell, C., Scientific Papers, Cambridge University Press: United Kingdom, 1890.
[8] Michell, A.G.M., The limit of economy of material in frame structures. Philosophical Magazine,8(47),pp.589–597,1904.doi:http://dx.doi.org/10.1080/14786440409463229
[9] Lévy, M., La statique graphique et ses applications aux constructions, Gauthiers-Villars: Paris, 1888.
[10] Zalewski, W., The Flow of Forces (Excerpt from Notes on Structural Behaviour for Ar- chitectural Students. Massachusetts Institute of Technology: United States of America, 1980.
[11] Zalewski, W. & Kus, S., Shaping structures of least weight. Proceedings of Internation- al Conference on Lightweight Structures in Civil Engineering, Warsaw, Poland, 1995.
[12] Zalewski, W. & Kus, S., Shaping structures of least weight. Proceedings of the Interna- tional Association for Shells and Spatials Structures, Stuttgart, Germany, 1996.
[13] Ripoll, V.Q. Sobre el teorema de Maxwell y la optimizacion de arcos de cubierto. Informes de la Construccion, 40(400), pp. 57–70, 1989. doi: http://dx.doi.org/10.3989/ ic.1989.v40.i400.1529
[14] Ripoll, V.Q., Sobre las formas de minimo volumen de las celosias de seccion constante. Informes de la Construccion, 43(418), pp. 61–77, 1992 doi: http://dx.doi.org/10.3989/ ic.1992.v43.i418.1355
[15] Van Steirteghem J., A contribution to the optimisation of structures using morphologi- cal indicators: (in)stability and dynamics. PhD Thesis, Vrije Universiteit Brussel, Brus- sels, Belgium, 2006.
[16] Latteur, P., Optimisation et prédimensionement des arcs et des treillis sur base d’indicateurs morphologiques – application aux structures soumises en partie ou en to- talité au flambement. PhD Thesis, Vrije Universiteit Brussel, Brussels, Belgium, 2000.
[17] Latteur, P., Samyn, P. & De Wilde, W.P., A search for efficient trusses. Proceedings of the International Association for Shells and Spatials Strucutres: International Sympo- sium Bridging Large Spans, From Antiquity to the Present, Istanbul, Turkey, 2000.
[18] Latteur P., Samyn P. & De Wilde, W.P., Etude du poids et de la raideur des treillis Warren, Pratt et Howe : Optimisation, prédimensionnement et comparaison sur base d’indicateurs morphologiques. Revue Française de Génie Civil, 4(4), 2000. doi: http:// dx.doi.org/10.1080/12795119.2000.9692283
[19] Latteur, P., Samyn, P. & De Wilde, W.P. , Optimisation des arcs funiculaires paraboliques et en chaînette, Aide à la conception sur base d’indicateurs morphologiques. Revue Française de Genie Civil, 5(1), 2001. doi: http://dx.doi.org/10.3166/rfgc.5.89-116
[20] De Wilde, W.P., Ontwerp van Constructies, Lecture notes, VUB Press, Vrije Universit- eit: Brussel, 2007.
[21] NBN ENV1993-1, Design of steel structures – Part 1-1: general rules and rules for buildings (Belgian application document). Belgisch Instituut voor Normalisatie, Belgium, 2002.
[22] Vanpee, P., Studie van de invloed van discrete secties bij de optimalistie van 2-dimen- sionale vakwerken, gebruikmakend van morfologische indicatoren. Master Eng. Sc. Thesis, Vrije Universiteit Brussel, Brussels, Belgium, 2007.
[23] Shanley, F.R., Weight-Strength Analysis of Aircraft Structures. 2nd edn. Dover Publica- tions: New York, 1960.
[24] Cox, H.L., The Design of Structures of Least Weight, Pergamon; London, 1965.
[25] Van Steirteghem, J., De Wilde, W.P., Samyn, P., Verbeeck, B. & Wattel, F., Optimum design of stayed columns with split-up cross arms. Adavances in Engineering Software, 36(9), pp. 614–625, 2005. doi: http://dx.doi.org/10.1016/j.advengsoft.2005.03.007
[26] Vandenbergh, T., De Wilde, W.P., Latteur, P., Verbeeck, B., Ponsaert, W. & Van Steirteghem, J., Influence of stiffness constraints on optimal design of trusses using morphological indicators. Proceedings of the Third International Conference on High Performance Structures and Materials, eds C.A. Brebbia and W.P. De Wilde,. Ostend: Belgium, 2006.
[27] Vandenbergh, T., Van Steirteghem, J., De Wilde, W.P. & Samyn, Ph., Dynamical analy- sis of the cable stayed beam, Proceedings of the International Association for Shells and Spatials Strucutres Conference on New Olympics, New Shells and Spatial Struc- tures, Beijing, China, 2006.
[28] Vandenbergh, T., De Wilde, W.P., Latteur, P. & Vantomme, L., Optimisation of statically determinate trusses considering planar instabilities at conceptual design stage. Proceed- ings for the Third International Congress dedicated to the art, science and practice of structural engineering (Structural Engineering World Congress), Bangalore, India, 2007.
[29] Vantomme, L., Uitbreiding van de theorie van de morfologische indicatoren naar het specifieke geval van de parabolische vakwerkboog: ontwerprichtlijnen en–strategie. Master Thesis, Vrije Universiteit Brussel, Brussels, Belgium, 2007.
[30] Vandenbergh, T. & De Wilde, W.P., Optimisation at conceptual design stage with mor- phological indicators: pros and cons. Proceedings of NCTAM 2009, 8th National Con- gress on Theoretical and Applied Mechanics, Brussels, Belgium, 2009.
[31] Beards, C.F., Structural Vibrations: Analysis and Damping. Arnold: London, 1996.
[32] Vandenbergh, T. & De Wilde, W.P., Vibration behavior of trusses at conceptual design stage, under pedestrian loading and using morphological indicators. Proceedings of the Second ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, eds. M/Papadrakakis, N.D. Lagaros & M. Fragiadakis. Rhodos, Greece, 2009.
[33] Vandenbergh, T. & De Wilde, W.P., Vibration behavior of statically determinate arches, under pedestrian loading and using morphological indicators. Proceedings of the Inter- national Association for Shells and Spatials Strucutres Conference on Evolution and Trends in Design, Analysis and Construction of Shell and Spatial Structures, eds. A. Domingo & C. Lazaro, Valencia, Spain, 2009.
[34] Vandenbergh, T., De Wilde, W.P. & Latteur, P., Basis for dynamic analysis and optimi- sation of statically determined 2D (un)damped structures at conceptual design stage using morphological indicators. Proceedings of the 17th International Association for Bridge and Structural Engineering Congress on Creating and Renewing Urban Struc- tures – Tall Buildings, Bridges and Infrastructure, Chicago, USA, 2008.
[35] British Standard 5400, Steel, Concrete and Composite Bridges – Part 2: Specifications for Loads: Appendix C: Vibration Serviceability Requirements for Foot and Cycle Track Bridges, British Standards Association: London, 1978.
[36] Bro2004, Väverkets allmänna tekniska beskrivning för nybyggande och förbättring av broar, Svesnk Byggtjänst: Sweden: 2004.
[37] Zivanovic, S., Pavic, A. & Reynolds, P., Vibration serviceability of footbridges under human-induced excitation: a literature revue. Journal of Sound and Vibration, 279, pp. 1–74, 2005. doi: http://dx.doi.org/10.1016/j.jsv.2004.01.019
[38] Vandenbergh, T., Verbeeck, B. & De Wilde, W.P., Dynamical analysis and optimisation of statically determinate trusses at conceptual design stage. Proceedings of the EC- COMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, eds. M. Papadrakakis, D.C. Charmpis, N.D. Lagaros, & Y. Tsompanakis, Crete, Greece, 2007.
[39] Lefevre, A., Dynamica van geoptimalseerde vakwerkstructuren in voorontwerpstadium met Morfologische Indicatoren: Verticale Voetgangersexcitatie. Master Eng. Sc. Thesis, Vrije Universiteit Brussel, Brussels, Belgium, 2008.
[40] Spranghers, K., Optimalisatie van boogconstructies in conceptueel ontwerpstadium met morfologische indincatoren en rekening houdend met het trillingsgedrag van (on) gedempte systemen. Master Thesis, Vrije Universiteit Brussel, Brussels, Belgium, 2008.
[41] Vandenbergh, T., De Wilde, W.P. & Latteur, P., Optimisation at conceptual design stage with morphological indicators: design for strength or design for stiffness? Proceedings of the Fourth International Conference on High Performance Structures and Materials, eds. W.P. De Wilde & C.A. Brebbia, Algarve, Portugal, 2008.
[42] Vandenbergh, T., Dynamische analyse van de getuide balk. Master Thesis, Vrije Uni- versiteit Brussel, Brussels, Belgium, 2005.
[43] Vandenbergh, M., Studie van het statisch en dynamisch gedrag van de enkelvoudige getuide balk mbv morfologische indicatoren. Master Thesis, Vrije Universiteit Brussel, Brussels, Belgium, 2007.
[44] Arup Vibration Seminar, Engineering for Structural Vibration – Current Developments in Research and Practice, Institution of Mechanical Engineers: London, 2001.
[45] Association Française de Génie Civil (Working group lead by Charles, P. and Hoorpah, P.). Assessment of Pedestrian-Induced Vibratory Behaviour of Footbridges, Association Française de Génie Civil (AFGC): France, 2006.
[46] Jodidio, P., Santiago Calatrava, Taschen, Köln, 2003, available at: www.taschen.com.
[47] Verbeeck, B., De Wilde, W.P., Samyn, P. & Van Steirteghem, J., The use of genetic al-gorithms and morphological indicators in the optimisation of 2D trusses. Proceedings of the Second International Conference on High Performance Structures and Materials, eds. C.A. Brebbia & W.P. De Wilde, Ancona, Italy, 2004.
[48] Verbeeck, B., Van Steirteghem, J., De Wilde, W.P. & Samyn, P., The need of numerical techniques for the optimisation of structures with morphological indicators. Proceed- ings of the Ninth International Conference on Computer Aided Optimum Design in Engineering, eds. S. Hernandez & C.A. Brebbia, Skiathos, Greece, 2005.
[49] Verbeeck, B., Van Steirteghem, J., De Wilde, W.P. & Samyn, P., Combining differ- ent optimisation techniques for trusses subjected to unusual load cases. Proceedings of WCSM 6, Rio de Janeiro, Brazil, 2005.
[50] Paduart, A., Re-design for change. A 4 dimensional renovation approach towards a dy- namic and sustainable building stock. PhD Thesis, MeMC Vrije Universiteit Brussel, Brussels, Belgium, 2012.