Home Journals ACSM Semi-active optimization control of space grid model with self-reset piezoelectric friction damper

JOURNAL METRICS

Impact Factor (JCR) 2022: 0.8 ℹImpact Factor (JCR):

The JCR provides quantitative tools for ranking, evaluating, categorizing, and comparing journals. The impact factor is one of these; it is a measure of the frequency with which the “average article” in a journal has been cited in a particular year or period. The annual JCR impact factor is a ratio between citations and recent citable items published. Thus, the impact factor of a journal is calculated by dividing the number of current year citations to the source items published in that journal during the previous two years.

5-Year Impact Factor: 0.7 ℹ5-Year Impact Factor:

A 5-Year Impact Factor shows the long-term citation trend for a journal. This is calculated differently from the Journal Impact Factor, so it is not simply an average of the Impact Factors in the time period. The Impact Factor itself is based only on Web of Science Core Collection citation data from the last three years and thus reflects only recent impact. The Journal Impact Factor is the average number of times articles from the journal published in the past two years have been cited in the Journal Citation Reports year.

CiteScore 2023: 1.7 ℹCiteScore:

CiteScore is the number of citations received by a journal in one year to documents published in the three previous years, divided by the number of documents indexed in Scopus published in those same three years.

SCImago Journal Rank (SJR) 2023: 0.215 ℹSCImago Journal Rank (SJR):

The SJR is a size-independent prestige indicator that ranks journals by their 'average prestige per article'. It is based on the idea that 'all citations are not created equal'. SJR is a measure of scientific influence of journals that accounts for both the number of citations received by a journal and the importance or prestige of the journals where such citations come from It measures the scientific influence of the average article in a journal, it expresses how central to the global scientific discussion an average article of the journal is.

Source Normalized Impact per Paper (SNIP) 2023: 0.388 ℹSource Normalized Impact per Paper (SNIP):

SNIP measures a source’s contextual citation impact by weighting citations based on the total number of citations in a subject field. It helps you make a direct comparison of sources in different subject fields. SNIP takes into account characteristics of the source's subject field, which is the set of documents citing that source.

qqtu_pian_20240428144739.png

Semi-active optimization control of space grid model with self-reset piezoelectric friction damper

Yang Liu ^*| Meng Zhan | Guangyuan Weng | Sheliang Wang

College of Civil Engineering, Xi’an University of Architecture and Technology, Xi’an 710055, China

School of Civil Engineering ＆ Geodesy, Shaanxi College of Communication Technology, Xi’an 710018, China

College of Architecture Engineering, HuangHuai University, Zhumadian 463000, China

Mechanical Engineering College Xi’an Shiyou University, Xi’an 710065, China

Corresponding Author Email:

yangliu1106@163.com

Received:

| |

Accepted:

| | Citation

503-515.pdf

OPEN ACCESS

https://acsm.revuesonline.com/accueil.jsp

Abstract:

This paper attempts to reduce the seismic hazards of building structure with an intelligent material called piezoelectric ceramics (PC). Specifically, the author designed a self-reset piezoelectric friction damper (SRPFD) based on laminated PC, and the number and position of dampers were optimized with genetic algorithm (GA) on the Matlab. On this basis, a large 24m×24m square pyramid space truss structure model was created, and the GA was optimized by the Gads toolbox. Then, 60 SRPFDs were selected to analyze the seismic response of the building structure. The results show that the control effect of the SRPFDs was improved by nearly 32.5% after the optimization. This research findings shed new light on semi-active optimization control of space grid models

Keywords:

genetic algorithm (GA), Optimal layout, Piezoelectric friction damper (PFD), Semi-active control

1. Introduction

2. Structure of SRPFD and damping force model

3. Control strategy

4. Structure model and optimization algorithm

5. Semi-active optimization control

6. Conclusions

Acknowledgment

The authors gratefully acknowledge the support of the Scientific Research Program Funded by Shaanxi Provincial Education Department (Program No.17JK0072).

References

Amjadian M., Agrawal A. K. (2017). A passive electromagnetic eddy current friction damper (PEMECFD). Theoretical and analytical modeling. Structural Control and Health Monitoring, Vol. 24, No. 10, pp. 1-23. https://doi.org/10.1002/stc.1978

Chen C. Q., Chen G. D. (2004). Shake table tests of a quarter-scale three-story building model with piezoelectric friction dampers. Structural Control and Health Monitoring, Vol. 11, No. 4, pp. 239-257. https://doi.org/10.1002/stc.41

Chen G. D., Garrett G. T., Chen C. Q., Cheng F. (2004). Piezoelectric friction dampers for earthquake mitigation of buildings design fabrication and characterization. Structural Engineering and Mechanics, Vol. 17, No. 3-4, pp. 539-556. https://doi.org/10.12989/sem.2004.17.3_4.539

Ghaffarzadeh H., Dehrod E. A., Talebian N. (2013). Semi-active fuzzy control for seismic response reduction of building frames using variable orifice dampers subjected to near-fault earthquakes. Journal of Vibration and Control, Vol. 19, No. 13, pp. 1980-1999. https://doi.org/10.1177/1077546312449179

Jaffe B., Cook W. R., Jaffe H. (1971). Piezoelectric ceramics. Academic Press, London.

Kannan S., Uras H. M., Aktan H. M. (1995). Active control of building seismic response by energy dissipation. Earthquake Engineering & Structural Dynamics, Vol. 24, pp. 747-759. https://doi.org/10.1002/eqe.4290240510

Laflamme S., Taylor D., Maane M. A., Connor J. J. (2012). Modified friction device for control of large-scale systems. Structural Control and Health Monitoring, Vol. 19, No. 4, pp. 548-64. https://doi.org/10.1002/stc.454

Liu W. F., Ren X. B. (2009), Large piezoelectric effect in Pb-free ceramics. Phys RevLett, Vol. 103, No. 25. pp. 1-4. https://doi.org/10.1103/PhysRevLett.103.257602

Moulson A. J., Herbert J. M. (2003). Electroceramics: Materials, Properties, Applications. Wiley, Chichester.

Ou J. P., Guan X. C. (1999). Research and development of civil engineering intelligent structure system. Earthquake Engineering and Engineering Vibration, Vol. 12, No. 2, pp. 21-28. https://doi.org/10.13197/j.eeev.1999.02.004

Pardo-Varela J., de la Llera J. C. (2015). A Semi-active piezoelectric friction damper. Earthquake Engineering & Structural Dynamics, Vol. 44, No. 3. pp. 333-354. https://doi.org/10.1002/eqe.2469

Qu W. L., Chen Z. H., Xu Y. L. (2000). Wind-induced vibration control of high-rise steel-truss tower using piezoelectric smart friction dampers. Journal of Earthquake Engineering and Engineering Vibration, Vol. 20, No. 1, pp. 94-99. https://doi.org/10.13197/j.eeev.2000.01.014

Senousy M. S., Rajapakse R. K. N. D., Mumford D., Gadala M. S. (2009). Self-heat generation in piezoelectric stack actuators used in fuel injectors. Smart Mater Struct, Vol.,18, No. 4. https://doi.org/10.1088/0964-1726/18/4/045008

Uchino K. (2000). Ferroelectric devices. Marcel Dekker, New York.

Yamamoto M., Aizawa S., Higashino M., Toyama K. (2001). Practical application of active mass dampers with hydraulic actuator. Earthquake Engineering and Structural Dynamics, Vol. 30, No. 11, pp. 1697-1717. https://doi.org/10.1002/eqe.88

Yang Y., Ou J. P. (2005), Numerical analysis of piezoelectric variable friction damper vibration attenuation structure. Journal of Vibration and Shock, Vol. 24, No. 6, pp. 1-4. https://doi.org/10.13465/j.cnki.jvs.2005.06.001

Zhao D. H., Li H. N. (2010). Shaking table tests and analyses of semi-active fuzzy control for structural seismic reduction with a piezoelectric variable friction damper. Smart Materials and Structures, Vol. 19, No. 10, pp. 105031. https://doi.org/10.1088/0964-1726/19/10/105031

Zhao D. H., Li Y. X., Li H. N., Qian H. (2016). Research on semi-active isolation structure based on multi-stage fuzzy control. Journal of Vibration and Shock, Vol. 35, No. 13, pp. 78-84. https://doi.org/10.13465/j.cnki.jvs.2016.13.013

IJHT
MMEP
ACSM
EJEE
ISI
I2M
JESA
RCMA
RIA
TS
IJSDP
IJSSE
IJDNE
JNMES
IJES
EESRJ
RCES
AMA_A
AMA_B
AMA_C
AMA_D
MMC_A
MMC_B
MMC_C
MMC_D

Username
Password
Remember me

Search form

Semi-active optimization control of space grid model with self-reset piezoelectric friction damper