Solid-recovered fuel to liquid conversion using fixed bed gasification technology and a Fischer–Tropsch synthesis unit – Case study

Solid-recovered fuel to liquid conversion using fixed bed gasification technology and a Fischer–Tropsch synthesis unit – Case study

Jakub Čespiva Jan Skřínský Ján Vereš Karel Borovec Mateusz Wnukowski

 

Energy Research Center, VŠB – Technical University of Ostrava, Czech Republic

WUST – Faculty of Mechanic and Power Engineering, Wroclaw University of Science and Technology, Poland

Page: 
212-222
|
DOI: 
https://doi.org/10.2495/EQ-V5-N3-212-222
Received: 
N/A
| |
Accepted: 
N/A
| | Citation

© 2020 IIETA. This article is published by IIETA and is licensed under the CC BY 4.0 license (http://creativecommons.org/licenses/by/4.0/).

OPEN ACCESS

Abstract: 

In order to utilise energy-rich solid waste, its liquid conversion into valuable hydrocarbon (HC) chains is one of the ways followed worldwide to decrease the oil processing and waste landfilling at the same time. The unique fixed bed updraft gasification reactor with an oscillating circular grate, situated in VŠB – Technical University of Ostrava, Czech Republic, can generate up to 90 m3·h−1 of CO and H2-rich synthetic gas. Such valuable mixture is suitable for the gas to liquid conversion in Fischer– Tropsch Micro Catalyst Bed (F-T MCB) unit, where more complex substances of higher temperature and pressure form in the environment. This article focuses on solid-recovered fuel (SRF) gained as a mixture of industrial and communal waste sources. Gasification of such material in the fixed bed reactor can produce approximately 600 and 250 m3 of CO and H2, respectively, per ton of SRF in the abided gasification conditions. The gas, retrieved from the process, undergoes a thermochemical reaction on the surface of a catalyst within the reactor of the Fischer–Tropsch unit. As a result, a highly valued HC liquid is achieved from the suitable, non-recyclable waste treatment. Cobalt and iron catalysts in their plain form, as well as the catalysts enriched with Mn/K enhancers are put in comparison in this study. The quality and quantity of the synthesis product are examined and the technological aspects of both units are described. The amount of HC synthesis product ranges from 18 to 45 kg per ton of fuel. The composition tends to form HC chains in favour of groups of alcohols and alkanes.

Keywords: 

cobalt catalyst, Fischer–Tropsch synthesis, fixed bed reactor, gasification, iron catalyst, solid-recovered fuel, waste management

  References

[1] OZO Annual report 2018, OZO Ostrava s.r.o., 52 pages, 2019 (in Czech)

[2] Jahangiri, H., Bennett, J., Mahajoubi, P., Wilson, K. & Gu, S., A review of advanced catalyst development for Fischer–Tropsch synthesis of hydrocarbons from biomass derived syn-gas. Catalysis Science & Technology, 4, pp. 2210–2229, 2014. https://doi.org/10.1039/C4CY00327F

[3] Pitron, J., Effect of material composition on the quality of TAP PALOZO II: Master thesis, VŠB – Technical University of Ostrava, Faculty of Mining and Geology, Insti-tute of environmental engineering, 2015, 51 pages, Tutor: Hlavatá, M. http://hdl.handle.net/10084/108074 (in Czech)

[4] Janša, J., Gasification of refuse derived fuel in autothermal generator: Doctoral thesis, VŠB – Technical University of Ostrava, Faculty of Mechanical Engineering, Department of Power Engineering, 2019, 141 pages. Tutor: Ochodek, T. http://hdl.handle.net/10084/138571 (in Czech)

[5] Ochodek, T. & Najser, J., Zplyňování biomasy I. Výzkumné energetické centrum, Ostrava, pp. 74–80, 2014. ISBN 978-80-248-3302-6. (in Czech)

[6] Čespiva, J., Skřinský, J. & Vereš J., Comparison of potential materials for producer gas wet scrubbing in pilot-scale gasification unit. Presented at 8th International Conference on Energy and Sustainability, 3–5 July, Coimbra, Portugal, 2019. doi:10.2495/ESUS190081

[7] Čespiva, J., Adjustment of the gasification reactor technology: Master thesis. Ostrava: VŠB – Technical University of Ostrava, Faculty of Mechanical Engineering, Department of Power Engineering, 2018, 54 pages. Tutor: Skřínský, J. http://hdl.handle.net/10084/129641

[8] Jalama, K., Effect of temperature on CO rate and product distribution during FischerTropsch reaction over Co/TiO2 catalyst. Proceedings of the World Congress on Engineering and Computer Science 2015, vol. II, San Francisco, USA, Oct. 21–23, 2015. ISSN: 2078-0966 (Online: http://www.iaeng.org/publication/WCECS2015/WCECS2015_pp656-658.pdf accessed on: 10 Feb. 2020.)

[9] Mahmoudi, H. et al., A review of Fischer Tropsch synthesis process, mechanism, surface chemistry and catalyst formulation. Biofuels Engineering, 2, pp. 11–31, 2017. doi:10.1515/bfuel-2017-0002

[10] Luo, M., Hamdeh, H. & Davis, B.H., Fischer-Tropsch synthesis: Catalyst activation of low alpha iron catalyst. Catalysts Today, 140(3–4), pp. 127–134, 2009. https://doi.org/10.1016/j.cattod.2008.10.004