OPEN ACCESS
In Linear Fresnel solar concentration systems there are some energy losses due to the arrangement of the primary reflectors. An important loss of geometric type is caused by the fact that mirrors have only one degree of freedom. Therefore, the accuracy of the solar tracking, at the ends of the collector, cannot be guaranteed, especially if the height of the absorber tube is considerable. The problem could be solved by making the primary reflectors placed at the ends of the plant movable around two axes. In the work, the mathematical law is analytically obtained to determine the position that each reflectors must assume during the day. The study shows that they must be moved independently in each direction. For the purposes of reducing the cost of the plant, a configuration is studied in which, around an axis, the reflectors are moved with the same motor, differentiating the movement only around the other axis of rotation. Thanks to the presence of the secondary reflector, the tracking error committed is not significant.
Finally, the advantages, in terms of performance, obtained with the adoption of the above-mentioned reflectors, both for North-South oriented plants and for East-West oriented plants, are illustrated.
concentrating solar power, linear Fresnel, bi-axial tracking system, law of motion
[1] Cucumo M, Ferraro V, Kaliakatsos D, Mele M, Barci G. (2016). Performance of a fields of geothermal probes to support the air conditioning plant of a public building powered by water/water heat pumps. International Journal of Heat and Technology 34(Sp.2): S535-S544. https://doi.org/10.18280/ijht.34Sp0248
[2] Kaliakatsos D, Cucumo M, Ferraro V, Mele M, Cucumo S, Miele A. (2017). Performance of dish-stirling CSP system with dislocated engine. International Journal of Energy and Environmental Engineering 8(1): 65-80. https://doi.org/10.1007/s40095-015-0183-z
[3] Cucumo M, Ferraro V, Kaliakatsos D, Mele M, Nicoletti F. (2017). Law of motion of reflectors for a linear Fresnel plant. International Journal of Heat and Technology 35(Sp.1): S78-S86. https://doi.org/10.18280/ijht.35Sp0111
[4] Cucumo M, Ferraro V, Kaliakatsos D, Mele M, Nicoletti F. (2016). Calculation model using finite-difference method for energy analysis in a concentrating solar plant with linear Fresnel reflectors. International Journal of Heat and Technology 34(Sp.2): S337-S345. https://doi.org/10.18280/ijht.34Sp0221
[5] Cucumo M, Ferraro V, Kaliakatsos D, Mele M. (2015). Analysis of the performances of a dish-stirling system equipped with hot chamber. International Journal of Heat and Technology 33(4): 125-136. https://doi.org/10.18280/ijht.330416