Home Journals JNMES Parametric Investigation and Modelling of Hardness and Surface Quality in CO2 Laser Cutting Process of AISI 314 Stainless Steel

JOURNAL METRICS

Impact Factor (JCR) 2023: 0.7 ℹImpact Factor (JCR):

The JCR provides quantitative tools for ranking, evaluating, categorizing, and comparing journals. The impact factor is one of these; it is a measure of the frequency with which the “average article” in a journal has been cited in a particular year or period. The annual JCR impact factor is a ratio between citations and recent citable items published. Thus, the impact factor of a journal is calculated by dividing the number of current year citations to the source items published in that journal during the previous two years.

5-Year Impact Factor: 0.8 ℹ5-Year Impact Factor:

A 5-Year Impact Factor shows the long-term citation trend for a journal. This is calculated differently from the Journal Impact Factor, so it is not simply an average of the Impact Factors in the time period. The Impact Factor itself is based only on Web of Science Core Collection citation data from the last three years and thus reflects only recent impact. The Journal Impact Factor is the average number of times articles from the journal published in the past two years have been cited in the Journal Citation Reports year.

CiteScore 2023: 1.9 ℹCiteScore:

CiteScore is the number of citations received by a journal in one year to documents published in the three previous years, divided by the number of documents indexed in Scopus published in those same three years.

SCImago Journal Rank (SJR) 2023: 0.23 ℹSCImago Journal Rank (SJR):

The SJR is a size-independent prestige indicator that ranks journals by their 'average prestige per article'. It is based on the idea that 'all citations are not created equal'. SJR is a measure of scientific influence of journals that accounts for both the number of citations received by a journal and the importance or prestige of the journals where such citations come from It measures the scientific influence of the average article in a journal, it expresses how central to the global scientific discussion an average article of the journal is.

Source Normalized Impact per Paper (SNIP) 2023: 0.350 ℹSource Normalized Impact per Paper (SNIP):

SNIP measures a source’s contextual citation impact by weighting citations based on the total number of citations in a subject field. It helps you make a direct comparison of sources in different subject fields. SNIP takes into account characteristics of the source's subject field, which is the set of documents citing that source.

240x200fu_ben_.jpg

qqtu_pian_20240428144739.png

Parametric Investigation and Modelling of Hardness and Surface Quality in CO2 Laser Cutting Process of AISI 314 Stainless Steel

Parametric Investigation and Modelling of Hardness and Surface Quality in CO₂ Laser Cutting Process of AISI 314 Stainless Steel

V. Senthilkumar | G. Jayaprakash

Department of Mechanical Engineering TRP Engineering College Tiruchirapalli, India

Department of Mechanical Engineering Saranathan College of Engineering Tiruchirapalli, India

Corresponding Author Email:

trpvsk12@gmail.com, jayaprakashcad@gmail.com

Received:

25 April 2017

| |

Accepted:

08 July 2017

| | Citation

v20n03a03_p101-107.pdf

OPEN ACCESS

Abstract:

Laser cutting is the popular unconventional manufacturing method widely used to cut various engineering materials. In this work CO₂ laser cutting of AISI 314 satinless steel has been investigated. This paper focus on the investigation into the effect of laser cutting parameters like laser power, assist gas pressure, cutting speed and stand-off distance on surface roughness, hardness and kerf dimensions like kerf width, kerf ratio and kerf taper in CO₂ laser cutting of AISI 314 stainless steel.

Keywords:

CO2 Laser cutting, laser power, assist gas pressure and cutting speed, stand-off distance, surface quality, hardness, AISI 314 stainless steel

1. Introduction

2. Literature Review

3. Experimental Procedure

4. Results and Discussion

5. Conclusion

References

[1] Omer Ozgur Kardas, Omer Keles, Sohail Akhtar, Bekir Sami Yilbas, Optics & Laser Technology, 64, 247 (2014).

[2] Powell J, Kaplan AFH, “A technical and commercial comparison of fiber laser and CO2 laser cutting” Proceedings of 31th International Congress on Applications of Lasers and Electro-Optics, Anaheim, CA, USA; 2012, p. 277-281.

[3] A.H.N. Dong-Gyu, Byun Kyung-Won, Trans. Nonferrous Met. Soc. Chin., 19 (1), 32 (2009).

[4] Riveiro A., Quintero F., lusquinos F., Comesana R., Pou J., Journal of Materials Processing Technology, 210 1138 (2010).

[5] Ghany KA, Newishy M., Journal of Materials Processing Technology, 168, 438 (2005).

[6] Arun Kumar Pandey, Avanish Kumar Dubey, Optics & Laser Technology, 44, 1858 (2012).

[7] Rajaram, N. et al., International Journal of Machine Tools and Manufacture, 43, 351 (2003).

[8] A. Stournaras, P. Stavropoulos, K. Salonitis, G. Chryssolouris, CIRP Journal of Manufacturing Science and Technology, 2, 61 (2009).

[9] Thawari, G. et al., Journal of Materials Processing Technology, 170, 229 (2005).

[10]M. Sundar, A.K. Nath, D.K. Bandyopadhyay, S.P. Chaudhuri, P.K. Dey, D. Misra, International Journal of Advanced Manu-facturing Technology, 40, 865 (2009).

[11]Milos Madic, U.P.B. Sci. Bull., Series D, 75, 1 (2013).

[12]Yilbas B.S., Journal of Materials Processing Technology, 155-156, 2106 (2004).

[13]Ghany, K.A. & Newishy, M., Journal of Material Processing Technology, 168, 438 (2005).

[14]Prof. Dhaval P. Patel, Mrugesh B. Khatri, International Journal of Engineering Research and Applications (IJERA), 2, 1190 (2012).

[15]Dubey, A.K.; and Yadava, V., Journal of Machine Tools and Manufacture, 48, 609 (2008).

[16]ILZARBE L, ÁLVAREZ MJ, VILES E, TANCO M, Qual. Reliab. Eng. Int., 24(4), 417 (2008).

IJHT
MMEP
ACSM
EJEE
ISI
I2M
JESA
RCMA
RIA
TS
IJSDP
IJSSE
IJDNE
JNMES
IJES
EESRJ
RCES
AMA_A
AMA_B
AMA_C
AMA_D
MMC_A
MMC_B
MMC_C
MMC_D

Username
Password
Remember me

Search form

Parametric Investigation and Modelling of Hardness and Surface Quality in CO2 Laser Cutting Process of AISI 314 Stainless Steel