Study on the Treatment of Circulating Water: PPy/PAN-based Activated Carbon Fiber Felt Composite as Electro-adsorption Electrode

Study on the Treatment of Circulating Water: PPy/PAN-based Activated Carbon Fiber Felt Composite as Electro-adsorption Electrode

Yang Liu Junbo Zhou Jing Wang 

Engineering Research Center for Polymer Processing Equipment, Ministry of Education, College of mechanical and electrical engineering, Beijing University of Chemical Technology, Beijing 100029, P.R. China.

Materials Science and Engineering,BeiHang University, Beijing 100191, P.R. China

Corresponding Author Email: 
zhogab@163.com
Page: 
1-4
|
DOI: 
https://doi.org/10.14447/jnmes.v18i1.380
Received: 
February 26, 2014
|
Accepted: 
October 31, 2014
|
Published: 
February 09, 2015
| Citation

OPEN ACCESS

Abstract: 

This study adopted PPy/PAN-based carbon fiber felt composite as a new electrode for desalination experiment. The result shows that this kind of composite electrode can significantly reduce the outlet conductivity when inlet chemical oxygen demand (COD) is over 300 mg/l. It additionally reduces COD to the value obtained with other electrodes.

Keywords: 

COD, absorption, polypyrrole, desalination, conductivity

1. Introduction
2. Experimental
3. Results and Discussion
4. Conclusion
  References

[1] Wu H.X., Zeng D.Y., Liu Y.M., Journal of the Central University For Nationalities (Natural Science Edition), 13, 154 (2004). 

[2] Wang Y.H., Chan K.Y., Li X.Y., Chemosphere, 65, 1087 (2006).

[3] Gaillard F., Levillain E., Lelieur J.P., Journal of Electroanal. Chem., 432, 129 (1997).

[4] Lin D.J., Chang C.L., Huang F.M. Polym., 44, 413 (2003).

[5] Ryoo M.W., Seo G., Water Research, 37, 1527 (2003).

[6] Bladergroen B.J., Yang K.Y.T., Langmuir, 17, 1961 (2001).

[7] Rasika H.V., Mauro F.G. Journal of Polymer, 47, 7349 (2006).

[8] Vishnuvardhan T.K., Kulkarni V.R., Basvaraja C., Raghavendra S.C., Bull., Mater. Sci., 29, 77 (2006).

[9] Hossein E., Science Journal, 3, 14 (2008).

[10] Lei J., Liang W., Martin C. R., Synthetic Metals, 48, 301 (1992).

[11] Firoz B.K., Senthilkumar R., Noel M., Anbu K. M., Synthetic Metals, 159, 3 (2009).

[12] Hughes M., Chen G.Z., Shaffer M., Fray D.J., Windle A.H. Chem. Mater., 14, 10 (2002).

[13] Gligor D., Cotet L., Danciu V., Journal of New Materials for Electrochemical System, 16, 97 (2013).

[14]  Liu Y., Zhou J.B., Int. J. Electrochem. Sci., 8, 4864 (2013).

[15] Torre M.A., Del R.C., Morales E., Journal of New Materials for Electrochemical Systems, 16, 189 (2013).