OPEN ACCESS
The effect of 1-butyl-3-methylimidazolium bis (trifluoromethylsulfonyl) imide (BMITFSI) incorporation on the structure, tensile and electromechanical properties of cellulose was premeditated by scanning electron microscopy, X-ray diffraction, tensile test and bend- ing actuation test. Both cellulose and BMITFSI were found to be thermodynamically compatible and have good miscibility. Addition of 0.02 wt% of BMITFSI resulted in augment of yield strength and Young’s modulus; meanwhile they were decreased upon increasing the BMITFSI content. Upon dispersion of 0.1 wt% BMITFSI, the bending displacement of the cellulose actuator was drastically enhanced in comparison with that of cellulose membrane.
Cellulose, Young’s modulus, Room Temperature Ionic Liquid, BMITFSI, Bending actuator.
This work is performed under the support of Creative Research Initiatives (EAPap Actuator) of NRF/ MEST, Korea.
[1] D. Klemm, B. Philipp, T. Heinze and U. Heinze U Carbohydr. Polym., 43, 206 (2000).
[2] J. Schurz Prog. Polym. Sci., 24, 481 (1999).
[3] G. R. Filho J. Membr.Sci., 82, 43 (1993).
[4] I. Arvanitoyannis J. Macromol. Sci. Part C: Rev. Macromol. Chem. Phys., 39, 205 (1999).
[5] Arvanitoyannis and C. G. Biliaderis Carbohydr. Polym., 38, 47 (1999).
[6] E. Psomiadou, I. Arvanitoyannis and N. Yamamoto Carbohydr. Polym., 31, 193 (1996).
[7] A.K. Bledzki and J. Gassan Prog. Polym. Sci., 24, 221 (1999).
[8] J. Kim, C. S. Song and S. R. Yun Smart. Mater. Struct., 15, 719 (2006).
[9] J. Kim, S. R. Yun and Z. Ounaies Macromolecules, 39, 4202 (2006).
[10] Y. Liu, M. J. Wang, Z. Y. Li, H. T. Liu, P. He and J. H. Li Langmuir., 21, 1618 (2005).
[11] M. C. Buzzeo, C. Hardacre and R. G. Compton Anal. Chem., 76, 4583 (2004).
[12] A.B. McEwen, H. L. Ngo, K. LeCompte and J. L. Goldman, J. Elctrochem. Soc., 146 (1996).
[13] H. Matsumoto, M. Yanagida, K. Tanimoto, M. Nomura, Y. Kitagawa and Y. Miyazaki Chem. Lett., 922 (2000).
[14] D. R. MacFarlane, P. Meakin, J. Sun, N. Amini and M. Forsyth J. Phys. Chem B, 103, 4164 (1999).
[15] X. B. Lu, J. Q. Hu, X. Yao, Z. P. Wang and J. H. Li Biomacromolecules, 7, 975 (2006).
[16] Y. Liu, L. J. Huang, S. J. Dong, Biosens. Bioelectron, 23, 35 (2007).
[17] S. L. Mu Electrochim. Acta, 52, 7827 (2007).
[18] J. Y. Kim, J. T. Kim, E. A. Song, Y. K. Min and H. Hamaguchi Macromolecules, 41, 2886 (2008).
[19] S. F. Ding, W. Wei and G. C. Zhao Electrochem. Commun., 9, 2202 (2007).
[20] F. N. Xi, L. J. Liu, W. Qi and X. F. Lin Biosens. Bioelectron, doi:10.1016/j.bios.2008.03.023 (2008).
[21] M. B. Turner, S. K. Spear, J. D. Holbrey and R. D. Rogers Biomacromolecules, 5, 1379 (2004).
[22] M. A. B. H. Susan, T. Kaneko, A. Noda and M. Watanabe J. Am.Chem. Soc., 127, 4976 (2005).
[23] M. Hasegawa, A. Isogi, F. Onabe and M. Usuda J. Appl. Polym. Sci., 45, 1857 (1992).
[24] M. P. Scott, M. Rahman and C. S. Brazel Euro. Polym. J., 39, 1947 (2003).
[25] H. J. Marrinan and J. Mann J. Polym. Sci., 21, 301 (1956).
[26] H. Z. Jung, R. R. Benerito, R. J. Berni and D. Mitcham J. Appl. Polym. Sci., 21, 1981 (1977).
[27] Akira Isogai “Material Science of Cellulose” Tokyo University Press, 2001.
[28] G. A. Marson and O. A. El Seoud J. Polym. Sci., Part A: Polym. Chem., 37, 3738 (1999).
[29] G. A. F. Roberts “Paper Chemistry” Blackie Academic & Professional, London, 1991.
[30] I.F. Aleksandrovich, Inozemtseva and A. B. Pakshver Khimicheskie Volokna, 6, 64 (1976).
[31] L. H. Sperling “Introduction to physical polymer science” Wiley, New York, 1992.
[32] N. G. Wang, J. Kim, Y. Chen, S. R. Yun and S. K. Lee Macromol. Res., 14, 624 (2006).
[33] C. Mangavel, J. Barbot, J. Gueäguen and Y. Popineau J. Agric. Food Chem., 51, 1447 (2003).
[34] S. R. Yun and J. Kim Smart Mater. Struct., 16, 1476 (2007).
[35] S. S. Rao “Mechanical Vibrations” 2 nd Edn. Reading, MA: Addison-Wesley, 398.
[36] K. M. Suresha, Yi Chen and J. Kim Macromol. Res, 17(2), 116 (2009).
[37] K. M. Suresha and J. Kim J. Nanosci. Nanotech, 9(10), 5757 (2009).
[38] M. C. Buzzeo, R. G. Evans and R. G. Compton Chem. Phys. Chem, 5, 1106 (2004).