OPEN ACCESS
Mobilisation of heavy freight vehicles in a sustainable manner requires providing accessibility and a welldefined, safe and smooth road network that allows short travel times to minimise the carbon foot print of heavy transport system. Road surface roughness affects the comfort of the driver and increases user costs in terms of vehicle operating costs and travel time. Achieving a smooth road network requires adopting appropriate maintenance and rehabilitation strategies. The latter requires the use of appropriate intervention criteria in terms of intervention measures and treatments. This paper describes the development and validation of a profile-based roughness measure referred to as the Heavy Articulated Truck Index (HATI). HATI can be used to identify road sections providing poor ride quality for heavy transport operators. The effectiveness of HATI as a measure of pavement damage due to dynamic wheel loads is also investigated. Adopting HATI and the other diagnostic measures proposed herein help road authorities implement appropriate maintenance strategies to ensure the sustainability of their pavement assets and reduce emissions generated by heavy and light vehicles, in addition to providing acceptable level of service to all road users.
dynamic wheel loading, expansive soils, heavy vehicles, road roughness, vibration
[1] Hassan, R., Assessment of Road Roughness Effects on Heavy Vehicles on State Highways in Victoria/Australia, PhD Thesis, Swinburne University of Technology: Melbourne, Australia, 2003.
[2] Austroads, A Road Profile Based Truck Ride Index (TRI), AP-R177/00, Austroads: Sydney, Australia, 2000.
[3] Jamison, N.J. & Cenek, P., Validation of a Proposed Truck Rotational Response Model, Central Laboratories Report 02-529706.00, Opus International Consultants Limited: New Zealand, 2002.
[4] Papagiannakis, A.T. & Gujarathi, M.S., Roughness model describing heavy vehicle-pavement interaction. Transportation Research Record, 1501, pp. 50–59, 1995.
[5] Cebon, D., Interaction between Heavy Vehicles and Road (The 39th L. Ray Buckendale Lecture), SAE: Pennsylvania USA, 1993.
[6] Sweatman, P. & McFarlane, S., Investigation into the Specification of Heavy Trucks and Consequent Effects on Truck Dynamics and Drivers, Final Report, Federal Office of Road Safety: Australia, 2000.
[7] International Standard Organisation (ISO) 2631-1, Mechanical Vibration and Shock Evaluation of Human Exposure to Whole Body Vibration, Part 1 General Requirements, 2nd edn, International Organization for Standardisation, 1997.
[8] Cramer, D., Fundamental Statistics For Social Research, step-by-step calculations and computer techniques using SPSS for Windows, Routledge, London/New York, 1998.
[9] Sayers, M.W. & Karamihas, S.M., The Little Book of Profiling, The University of Michigan, Transportation Research Institute: USA, 1998.
[10] Granlund, J., Ahlin, K., & Lundström, R., Whole Body Vibration When Riding on Rough Roads, Vagverket Publication 2000: 31E, Sweden, 2000.
[11] Cebon, D., Handbook of Vehicle Road Interaction, Swets & Zeitlinger Publishers: London, 1999.
[12] De Pont, J., Road Profile Characterisation, Transit New Zealand Research Report No. 29, 1994.
[13] Sweatman, P.F., A Study of the Dynamic Wheel Forces in Axle Group Suspensions of Heavy Vehicles, ARRB Special Report No. 27, 1983.