An intelligent, automatic body measurement system based on ultrasonic sensor arrays

An intelligent, automatic body measurement system based on ultrasonic sensor arrays

Qiuhan Wang 

School of Fashion, Wuhan Textile University, Wuhan 430200, China

Corresponding Author Email: 
wqiuhan@wtu.edu.cn
Page: 
625-639
|
DOI: 
https://doi.org/10.3166/I2M.17.625-639
Received: 
| |
Accepted: 
| | Citation

OPEN ACCESS

Abstract: 

This paper aims to achieve automatic and efficient measurement of the body in garment customization. Therefore, an intelligent body measurement system was established based on ultrasonic sensor arrays, which can efficiently capture the bust, waist and hip (BWH) information. In the system, the exact distance between the body and the sensor is captured by a pair of ultrasonic sensor arrays; then, the depth information is processed by the BWH generation method, including space coordinate generation, curve fitting and curve integration. The experimental results show that the proposed system can achieve a measuring accuracy of 99.61%, indicating that the proposed system is an ideal tool for garment customization.

Keywords: 

garment customization, body measurement, ultrasonic sensor array, curve fitting

1. Introduction
2. Methodology
3. Experimental verification
4. Discussion
5. Conclusions
Acknowledgement

Research of comprehensive guarantee system clothing and outfit for single pawn(police)

  References

Akimoto T., Terada N., Yonezawa I., Muto O., Kawasaki T., Momomura R., Kaneko K. (2013). Development of measurement system for scoliosis using 3d camera. IEEE Transactions on Electronics Information Systems C, Vol. 133, No. 11, pp. 2082-2088. https://doi.org/10.1541/ieejeiss.133.2082

Biswas S., Ghoshal D., Hazra R. (2016). A new algorithm of image segmentation using curve fitting based higher order polynomial smoothing. Optik-International Journal for Light and Electron Optics, Vol. 127, No. 20, pp. 8916-8925. https://doi.org/10.1016/j.ijleo.2016.06.110

Brooks E. B., Thomas V. A., Wynne R. H., Coulston J. W. (2012). Fitting the multitemporal curve: A Fourier series approach to the missing data problem in remote sensing analysis. IEEE Transactions on Geoscience Remote Sensing, Vol. 50, No. 9, pp. 3340-3353. https://doi.org/10.1109/TGRS.2012.2183137

Cai Z., Liu X., Peng X., Yin Y., Li A., Wu J., Gao B. Z. (2016). Structured light eld 3d imaging. Optics Express, Vol. 24, No. 18, pp. 20324.

Cao S., Cao Y., Lu M., Zhang Q. (2014). 3d shape measurement for moving scenes using an interlaced scanning colour camera. Journal of Optics, Vol. 16, No. 12. https://doi.org/10.1088/2040-8978/16/12/125411/meta

Chen F., Chen X., Xie X., Feng X., Yang L. (2013). Fullfield 3d measurement using multi-camera digital image correlation system. Optics Lasers in Engineering, Vol. 51, No. 9, pp. 1044-1052. https://doi.org/10.1016/j.optlaseng.2013.03.001

Cui H., Liao W., Dai N., Cheng X. (2012). An exible and rapid micro-adjustment algorithm for structured light 3d measurement system with camera projector. Optik-International Journal for Light and Electron Optics, Vol. 123, No. 2, pp. 109-116. https://doi.org/10.1016/j.ijleo.2011.03.008

Floater M. S. (2006). High order approximation of rational curves by polynomial curves. Computer Aided Geometric Design, Vol. 23, No. 8, pp. 621-628. https://doi.org/10.1016/j.cagd.2006.06.003

Giachetti A., Lovato C., Piscitelli F., Milanese C., Zancanaro C. (2015). Robust automatic measurement of 3d scanned models for the human body fat estimation. IEEE Journal of Biomedical Health Informatics, Vol. 19, No. 2, pp. 660-667. https://doi.org/10.1109/JBHI.2014.2314360

Guo L., Tian S., Jiang J. (2015). Estimation of channel mismatches in time-interleaved analog-to-digital converters based on fractional delay and sine curve fitting. Review of Scientific Instruments, Vol. 86, No. 3, pp. 1618-615.

Haris M., Widyanto M. R., Nobuhara H. (2016). Firstorder derivative-based superresolution. Signal Image Video Processing, No. 1, pp. 1-8. https://doi.org/10.1007/s11760-016-0880-y

He Y., Cao Y. (2011). A composite-structured-light 3d measurement method based on fringe parameter calibration. Optics Lasers in Engineering, Vol. 49, No. 7, pp. 773-779. https://doi.org/10.1016/j.optlaseng.2011.03.013

Huang J., Xue Q., Wang Z., Gao J. (2016). Analysis and compensation for lateral chromatic aberration in a color coding structured light 3d measurement system. Sensors, Vol. 16, No. 9. https://doi.org/10.3390/s16091426

Johnson R. T., Montgomery D. C., Jones B., Parker P. A. (2010). Comparing computer experiments for fitting high-order polynomial metamodels. Journal of Quality Technology, Vol. 42, No. 1, pp. 86-102.

Juki D., Scitovski R. (2005). Least squares fitting gaussian type curve. Applied Mathematics and Computation, Vol. 167, No. 1, pp. 286-298. https://doi.org/10.1016/j.amc.2004.06.084

Kim H. T., Jin K. C., Kim S. T., Kim J., Choi S. B. (2016). 3d body scanning measurement system associated with rf imaging, zero-padding and parallel processing. Measurement Science Review, Vol. 16, No. 2, pp. 77-86.

Kumar S., Furuhashi H. (2017). Long-range measurement system using ultrasonic range sensor with high-power transmitter array in air. Ultrasonics, Vol. 74, pp. 186-195. https://doi.org/10.1016/j.ultras.2016.10.012

Lin Y., Liu S. (2000). Law of exponentiality and exponential curve fitting. Systems Analysis Modelling Simulation, Vol. 38, No. 4, pp. 621-636.

Liu X., Zhao H., Zhan G., Zhong K., Li Z., Chao Y., Shi Y. (2016). Rapid and automatic 3d body measurement system based on a gpu-steger line detector. Appl Opt, Vol. 55, No. 21, pp. 5539-5547. https://doi.org/10.1364/AO.55.005539

Lrenz-Fonfria V. A., Padrs E. (2004). Curve fitting of Fourier manipulated spectra comprising apodization, smoothing, derivation and deconvolution. Spectrochimica Acta Part A Molecular Biomolecular Spectroscopy, Vol. 60, No. 12, pp. 2703-2710. https://doi.org/10.1016/j.saa.2004.01.008

Mohammed G. A., Hou M. (2016). Optimization of active muscle force length models using least squares curve fitting. IEEE Trans Biomed Eng, Vol. 63, No. 3, pp. 630-635. https://doi.org/10.1109/TBME.2015.2467169

Petrak S., Naglic M. M. (2017). Dynamic anthropometry defining protocols for automatic body measurement. Tekstilec, Vol. 60, No. 4, pp. 254-262. https://doi.org/10.14502/Tekstilec2017.60.254-262

Rabadan J., Guerra V., Rodrguez R., Rufo J., Lu-narivera M., Perezjimenez R. (2017). Hybrid visible light and ultrasound-based sensor for distance estimation. Sensors, Vol. 17, No. 2, pp. 330. https://doi.org/10.3390/s17020330

Renczes B., Kollr I., Dabczi T. (2016). Efficient implementation of least squares sine fitting algorithms. IEEE Transactions on Instrumentation Measurement, Vol. 65, No. 12, pp. 2717-2724. https://doi.org/10.1109/TIM.2016.2600998

Sekiya F., Sugimoto A. (2015). Fitting discrete polynomial curve and surface to noisy data. Kluwer Academic Publishers. https://doi.org/10.1007/s10472-014-9425-7

Shuan Y. C., Ding B. Y., Ouyang M. (2016). The review on the modified exponential model in the fitting of loading settlement curves of single pile. Applied Mechanics Materials, Vol. 501-504, pp. 892-904. https://doi.org/10.4028/www.scientific.net/AMM.501-504.892

Sun Y., Wang T., Huang Y., Sun Y. (2017). Personalized recommendation system for sina microcomic users. Wireless Telecommunications Symposium, pp. 1-6. https://doi.org/10.1109/WTS.2017.7943533

Uhm T., Park H., Park J. I. (2015). Fully vision-based automatic human body measurement system for apparel application. Measurement, Vol. 61, pp. 169-179. https://doi.org/10.1016/j.measurement.2014.10.044

Wang Y. (2015). Non-contact human body measuring technology based on camera calibration technique. Journal of Fiber Bioengineering Informatics, Vol. 8, No. 4.

Wang Y. (2015). The laser rotating of non-contact body scanning system. Journal of Fiber Bioengineering Informatics, Vol. 8, No. 1, pp. 91-103. https://doi.org/10.3993/jfbi03201509

Zhu X. J., Wu X., Shi X., Xu B. G. (2017). Framework of personalized clothing visualization. International Journal of Clothing Science Technology, Vol. 29, No. 3. https://doi.org/10.1108/IJCST-07-2016-0080