Vol 21, No 2, December 2003

Modelling of thermal radiation properties of gases: The exponential wide band model (EWBM)

1-10

Nilsson, T.K.Email Author,Sundén, B.

DOI: 10.18280/ijht210201

On the optimum thermal design of longitudinal convective rectangular fin arrays

11-22

Casarosa, C.,Franco, A.

DOI: 10.18280/ijht.210202

Development of a high-performance combustor for use in a greenhouse

23-30

Sato, K. Email Author,Chiba, Y. ,Obara, Y.

DOI: 10.18280/ijht.210203

Comparison of four analytical and numerical models for a microchannel heat sink

31-42

Cossali, G.E.,Di Pietro, D.A.,Marengo, M.

DOI: 10.18280/ijht.210204

Catalyst mounting inversion heat transfer

43-47

Charalampos, A.I.

DOI: 10.18280/ijht.210205

Numerical study on the geometric optimisation of a negative fin

49-53

Biserni, C.,Lorenzini, E.

DOI: 10.18280/ijht.210206

Flow measurements and investigations in a staggered tube matrix of a heat exchanger

55-63

Goulas, A. ,Katheder, K. ,Palikaras, A. ,Yakinthos, K.

DOI: 10.18280/ijht.210207

Simulation of an energy efficient HFC134a/HC600a/HC290 refrigerant mixture performance in domestic refrigerator

65-71

Joseph Sekhar, S.,Saravanaram, T.,Mohan Lal, D.,Renganarayanan, S.

DOI: 10.18280/ijht.210208

The numerical solution of three dimensional transient heat conduction problems using element free Galerkin method

Singh, I.V.Email Author,Prakash, R.

DOI: 10.18280/ijht.210209

New proposed dual purpose household refrigerator worked on carbon dioxide

81-87

Damseh, R.A. Email Author,Hammad, M.A.

DOI: 10.18280/ijht210210

The variability effect of fluid thermo-physical properties on convective drying of unsaturated porous media

89-97

Mobarki, A. ,Boukadida, N. ,Ben Nasrallah, S.

DOI: 10.18280/ijht.210211

Meshless EFG method in transient heat conduction problems

99-105

Singh, I.V. Email Author,Sandeep, K. Email Author,Prakash, R.

DOI: 10.18280/ijht.210212

Measurement of the thermal resistance of masonry walls

107-114

Buratti, C. Email Author,Grignaffini, S.

DOI: 10.18280/ijht.210213

Flow of an elastico-viscous fluid past a continuously moving semi-infinite plate

115-118

Das, U.N. ,Ray, S.N. ,Deka, R.K. ,Soundalgekar, V.M.

DOI: 10.18280/ijht.210214

Boiling heat transfer around a cylindrical heater impinged by a slot jet

119-123

Bartoli, C.,Faggiani, S.

DOI: 10.18280/ijht.210215

On the application of the Wilson Plot Technique

125-130

Roetzel, W. Email Author,Ranong, C.N.

DOI: 10.18280/ijht.210216

2-D study of transient heat and mass transfer during absorption in a closed metal-hydrogen reactor

131-138

Askri, F.,Jemni, A.,Ben Nasrallah, S.

DOI: 10.18280/ijht.210217

A method to estimate turbulent natural convection heat transfer to air from a vertical plate

139-146

Sarma, P.K. Email Author,Kishore, P.S. ,Rao, K.V.S.G. ,Rao, V.D. , Subrahmanyam, T.

DOI: 10.18280/ijht.210218

Crowave heating of catalyst bed with resonant modes

147-154

Estel, L. Email Author,Bonnet, C. ,Ledoux, A. ,Cenac, A. ,Cluzel, S.M.G.

DOI: 10.18280/ijht.210219

Recovery and regularization of the initial temperature distribution in a cylinder

155-160

Masood, K. Email Author,Messaoudi, S. Email Author,Zaman, F.D.

DOI: 10.18280/ijht.210220

Fire smoke movement in tunnel scale models theory and experimental observations

161-166

Cafaro, E.,Stantero, L.

DOI: 10.18280/ijht.210221

Feasibility analysis of a high temperature heat exchanger for combined cycles

167-174

Aquaro, D. Email Author,Piccitto, U. Email Author,Pieve, M.

DOI: 10.18280/ijht.210222

Flow around a spherical nodule during its crystallization

175-182

El Omari, K.,Dumas, J.-P.

DOI: 10.18280/ijht.210223

Convective and convective radiative drying of unsaturated porous media at high temperature and high water vapour concentration

183-191

Mobarki, A. ,Boukadida, N. ,Ben Nasrallah, S.

DOI: 10.18280/ijht.210224

Forced heat transfer for pulsating flow in composite porous/fluid system

193-202

Dhahri, H.Email Author,Boughamoura, A.,Ben Nasrallah, S.

DOI: 10.18280/ijht.210225