Vol 5, No 3, September 2018

A simple correlation for the dynamic simulation of a solar thermal plant connected to a radiant floor

131-138

Mario Cucumo, Vittorio Ferraro, Dimitrios Kaliakatsos, Marilena Mele

DOI: 10.18280/mmep.050301

Introducing exergy analysis in life cycle assessment: A case study

139-145

Teresa M. Gulotta, Francesco Guarino, Marina Mistretta, Maurizio Cellura, Giulio Lorenzini

DOI: 10.18280/mmep.050302

Heat and moisture transfer investigation of surface building materials

146-152

Carla Balocco, Giuseppe Petrone

DOI: 10.18280/mmep.050303

How to enhance the energy efficiency of HVAC systems

153-160

A. Genco, A. Viggiano, V. Magi

DOI: 10.18280/mmep.050304

Experiments on parallel connected loops in single phase natural circulation: preliminary results

161-167

Annalisa Marchitto, Mario Misale

DOI: 10.18280/mmep.050305

Thermophysical characterization of a cardboard emergency kit-house

168-174

Dario L. Distefano, Antonio Gagliano, Emanuele Naboni, Vincenzo Sapienza, Nicola Timpanaro

DOI: 10.18280/mmep.050306

Energy performance of cross-laminated timber panel (X-Lam) buildings: A case study

175-182

Francesco Nocera, Antonio Gagliano, Maurizio Detommaso

DOI: 10.18280/mmep.050307

Clay and fibers: Energy efficiency in buildings between tradition and innovation

183-189

T. Cardinale, C. Sposato, A. Feo P, De Fazio

DOI: 10.18280/mmep.050308

GIS based risk assessment of oil spill and gas leakage vulnerable zones in Pakistan

190-196

Syed T. Tirmizi, Syed R.U.H. Tirmizi

DOI: 10.18280/mmep.050309

The importance of thermal bridge correction in energy refurbishment of existing buildings

197-204

Stefano Bergero, Paolo Cavalletti, Anna Chiari

DOI: 10.18280/mmep.050310

Testing a dual-source heat pump

205-210

M. Cannistraro, E. Mainardi, M. Bottarelli

DOI: 10.18280/mmep.050311

Weather data morphing to improve building energy modeling in an urban context

211-216

Gianpiero Evola, Luigi Marletta, Damiano Cimino

DOI: 10.18280/mmep.050312

Survey-based analysis of the electrical energy demand in Italian households

217-224

Matteo Caldera, Paola Ungaro, Guiliano Cammarata, Giovanni Puglisi

DOI: 10.18280/mmep.050313

A robust approach for WSN localization for underground coal mine monitoring using improved RSSI technique

225-231

Banda Srikanth, Hemant Kumar, Karanam U.M Rao

DOI: 10.18280/mmep.050314

The relaxation effect on residual stress value in butt-welded X70 steel

232-236

Mostapha Hamdi, Hadj A. Belhorma, Ahmed Benchatti, Mohamed Souici, Belkacem Boutassouna

DOI: 10.18280/mmep.050315

Simplified analysis of heat transfer through a finned tube bundle in air cooled condenser

237-242

Yanán Camaraza-Medina, Ángel M. Rubio-Gonzales, Oscar M. Cruz-Fonticiella, Osvaldo F. García-Morales

DOI: 10.18280/mmep.050316

Application of computational experiments based on the response surface methodology for studying of the recirculation zone in the Y-shaped channel

243-248

Elham Omidbakhsh Amiri

DOI: 10.18280/mmep.050317

Prevention of illegal transportation using ANPR and biometric fingerprint in mining industry

249-255

Debi P. Tripathy, Yelipeta N. Harish

DOI: 10.18280/mmep.050318

Selection of suitable location and method for installation of TDR in opencast mine-an experimental approach

256-259

Guntha Karthik, Singam Jayanthu

DOI: 10.18280/mmep.050319

Transient pressure driven flow in an annulus partially filled with porous material: Azimuthal pressure gradient

260-267

Basant K. Jha, Taiwo S. Yusuf

DOI: 10.18280/mmep.050320

Cost optimal analysis of energy refurbishment actions depending on the local climate and its variations

268-274

A. Magrini, S. Lazzari, L. Marenco, G. Guazzi

DOI: 10.18280/mmep.050321