Phenol Adsorption property of high specific surface areas biomass based porous carbon materials
|
157-161
|
Ling Zhang, Tiandong Zhang, Rui Gao, Danyu Tang, Jianyun Yang, Tianlin Fu and Zhaolin Zhan
|
DOI: 10.18280/mmep.030401
|
Mathematical modelling for natural convective heat transfer of nanofluid inside a prismatic enclosure with various thermal boundary conditions
|
162-170
|
M. S. Alam
|
DOI: 10.18280/mmep.030402
|
Bare hands threshing stress analysis and bionics bare hand threshing device test
|
171-174
|
Ma Lei
|
DOI: 10.18280/mmep.030403
|
An empirical study: integrating relative coordinates with simulated annealing to solve a traveling salesman problem
|
175-178
|
Zhendong Huang, Xiaojun Liu and Yingshan Tan
|
DOI: 10.18280/mmep.030404
|
Simulation study on stress intensity factors of surface crack of hollow axle
|
179-183
|
Haobo Lin, Qiang Li and Ran Ding
|
DOI: 10.18280/mmep.030405
|
Greenhouse environment inspection vehicle control system design based on ZigBee
|
184-190
|
Li Liu, Yinggang Shi, Yan Long, Jizheng Zhao, Jun Chen and Yongjie Cui
|
DOI: 10.18280/mmep.030406
|
Modeling the problem of contact and friction between a body elastic and rigid foundation
|
191-194
|
Boura Mohammed and Benzegaou Ali
|
DOI: 10.18280/mmep.030407
|
The effects of using a biofuel on the performance of a marine diesel engine
|
195-197
|
Mohamed Seddak and Abdelkrim Liazid
|
DOI: 10.18280/mmep.030408
|
Detection of the micro defects on the transparent optical materials by the topographic moiré
|
198-201
|
Meziane Rahima and Meguellati Said
|
DOI: 10.18280/mmep.030408
|
The thermal study of wave propagation in functionally graded material plates (FGM) Based on neutral surface position
|
202-205
|
Boukhari Ahmed, Boukhelf Fouad, Benbakhti Abdel Djalil, Bachir Bouiadjra Mohamed, Tounsi Abdelouahed and Elabbes Adda Bedia
|
DOI: 10.18280/mmep.030408
|