Effects of variable viscosity and thermal conductivity on steady magnetohydrodynamic flow of a micropolar fluid through a specially characterized horizontal channel
|
1-13
|
G.C. Hazarika, B. Phukan
|
DOI: 10.18280/mmc_b.860101
|
Buoyancy effects on free convective MHD flow in the presence of heat source/sink
|
14-32
|
B. Nayaka, S. Baagb, S.R. Mishra
|
DOI: 10.18280/mmc_b.860102
|
Study on numerical simulation of spirality inserted piece for heat exchanger
|
33-48
|
Qiang Guo, Chengjun Zhang, Zhidong Wu, Qingming Hu
|
DOI: 10.18280/mmc_b.860103
|
The research on flexural behavior experiment of prestressed glue-lumber beams after longterm loading
|
49-62
|
Nan Guo, Haixin Jiang, Hongliang Zuo
|
DOI: 10.18280/mmc_b.860104
|
Correlative comparison of gas CO2 pipeline transportation and natural gas pipeline transportation
|
63-75
|
Yindi Zhang, Die Wang, Jianping Yang, Emmanuel Adu, Qiuwan Shen, Lei Tian, Lijuan Wu, Baocheng Shi
|
DOI: 10.18280/mmc_b.860105
|
Dynamic modeling and experimental analysis of magnetic fluid dampers
|
76-90
|
Jianfeng Wang, Jingxin Xiao, Yunfeng Liang, Jing Zhang
|
DOI: 10.18280/mmc_b.860106
|
Experimental study on the axial compressive properties of FRP-reinforced seawater aggregate concrete brick masonry
|
91-103
|
Guoxin Zheng, Hua Cheng, Huayou Liang
|
DOI: 10.18280/mmc_b.860107
|
Research on the influence of infill walls on seismic performance of masonry buildings with bottom frame-shear walls
|
104-114
|
Guodong Li, Xiang Li, Nan Guo
|
DOI: 10.18280/mmc_b.860108
|
Application of anchor frame beam in expansive soil slope
|
115-125
|
Xinzheng Wang, Yizheng Sun
|
DOI: 10.18280/mmc_b.860109
|
Numerical analysis of solid-liquid turbulent flow in Francis turbine spiral case
|
126-140
|
Huiyan Wang, Xiaobing Liu
|
DOI: 10.18280/mmc_b.860110
|
Pressure-dependent behaviour of gas permeability of undisturbed loess
|
141-154
|
Xiangwei Fang, Jie Li, Chunhai Li
|
DOI: 10.18280/mmc_b.860111
|
Structure analysis of a large water conveyance tunnel with consideration of grouting circle failure
|
155-168
|
Q. Yuan, Y.Z. Wang, W.J. You, G.N. Xu
|
DOI: 10.18280/mmc_b.860112
|
Chained-form design and motion planning for a nonholonomic manipulator
|
169-184
|
Liang Li
|
DOI: 10.18280/mmc_b.860113
|
Construction optimization and application of shield launching reaction frame of large diameter shield tunnel
|
185-197
|
Zhuang Xie, Jinyang Fu, Junsheng Yang, Yufeng Shi, Wenhua Guo
|
DOI: 10.18280/mmc_b.860114
|
Design of linear shaped charge for controlled rock fragmentation of brittle material
|
198-220
|
Zhenyang Xu, Yanning Yu, Jun Yang
|
DOI: 10.18280/mmc_b.860115
|
Analysis and application of water inrush mechanism in tunnel based on thin plate model
|
221-232
|
Bingbing Chen, Zhenhua Fu
|
DOI: 10.18280/mmc_b.860116
|
Unsteady natural convection in a water filled cavity with hot partitioned wall
|
233-249
|
Farah Zemani, Amina S. Bendehina
|
DOI: 10.18280/mmc_b.860117
|
Coupled flow network model and CFD analysis for a combined impingement and film cooled gas turbine nozzle guide vane
|
250-270
|
Pol Reddy Kukutla, B.V.S.S.S Prasad
|
DOI: 10.18280/mmc_b.860118
|
Computational analysis of nonnewtonian boundary layer flow of nanofluid past a vertical plate with partial slip
|
271-295
|
A. Subba Rao, N. Nagendra, C.H. Amanulla, M. Surya Narayana Reddy, O. Anwar Bég
|
DOI: 10.18280/mmc_b.860119
|
Performance evaluation of nanofluid for heat transfer enhancement and pumping power reduction through a semicircular corrugated pipe
|
296-311
|
M. Salehin, M.M. Ehsan, A.K.M. Sadrul
|
DOI: 10.18280/mmc_b.860120
|
A comparison of mechanical artefacts used in calibration of coordinate measuring machines (CMMs)
|
312-320
|
Mendiratta Karun
|
DOI: 10.18280/mmc_b.860121
|
High rock bench landslide mechanism with offset dragline excavation
|
321-334
|
Hongze Zhao, Duojin Wu, Hairui Du, ChiSeng Kong
|
DOI: 10.18280/mmc_b.860122
|