Vol 35, No 3, September 2017

Entropy generation and irreversibility analysis due to steady mixed convection flow in a vertical porous channel

433-446

Abiodun O. Ajibade, Thomas U. Onoja

DOI: 10.18280/ijht.350301

Free convection enhancement within a nanofluid’ filled enclosure with square heaters

447-458

Abdelkader Boutra, Karim Ragui, Nabila Labsi, Youb K. Benkahla

DOI: 10.18280/ijht.350302

Numerical solutions of 2-D unsteady incompressible flow with heat transfer in a driven square cavity using streamfunction-vorticity formulation

459-473

Vusala Ambethkar, Manoj Kumar

DOI: 10.18280/ijht.350303

Thermal analysis of greenhouses installed under semi arid climate

474-486

Kamel Mesmoudi, Kheireddine Meguellati, Pierre-Emmanuel Bournet

DOI: 10.18280/ijht.350304

Joule heating effect on entropy generation in MHD mixed convection flow of chemically reacting nanofluid between two concentric cylinders

487-497

Darbhasayanam Srinivasacharya, Md. Shafeeurrahman

DOI: 10.18280/ijht.350305

Performance analysis of stand-alone solar dish Stirling system for electricity generation

498-508

Khaled Bataineh, Yazan Taamneh

DOI: 10.18280/ijht.350306

Fouling and its effect on the thermal performance of heat exchanger tubes

509-519

Pullela K. Sarma, Ramakrishna Konijeti, Tunuguntla Subramanyam, Lankapalli S.V. Prasad, Viswanatha S. Korada, Vadapalli Srinivas, Dharma R. Vedula, Veerapanen S.R.K. Prasad

DOI: 10.18280/ijht.350307

Numerical study of the swirl direction effect at the turbulent diffusion flame characteristics

520-528

Djemoui Lalmi, Redjem Hadef

DOI: 10.18280/ijht.350308

Double vortex generators for increasing the separation efficiency of the air separator

529-538

Ali M. Jawarneh, Mohamad Al-Widyan, Ahmad Al-Migdady, Hitham Tlilan, Mohammad Tarawneh, Amer Ababneh

DOI: 10.18280/ijht.350309

Influence of low concentration of diamond water nanofluid in loop heat pipe

539-548

Tan S. Aun, Mohd Z. Abdullah, Prem Gunnasegaran

DOI: 10.18280/ijht.350310

Validation of a simplified method for the evaluation of pressure and temperature on a RR Merlin XX head

549-558

Luca Piancastelli, A. Burnelli, Stefano Cassani

DOI: 10.18280/ijht.350311

Experimental research on temperature variation and crack development in coalfield fire

559-566

Jinbiao Fei, Hu Wen

DOI: 10.18280/ijht.350312

Numerical study of mixed convection and flow pattern in various across-shape concave enclosures

567-575

Hamdi Messaoud, Meziani Bachir, Sadaoui Djamel

DOI: 10.18280/ijht.350313

Experimental study on thermal properties of bio-composite (gypsum plaster reinforced with palm tree fibers) for building insulation

576-584

Ines Amara, Atef Mazioud, Ines Boulaoued, Abdallah Mhimid

DOI: 10.18280/ijht.350314

Experimental research on hydraulic characteristic of centrifugal pump in plateau

585-593

Jiang Li, Weiming Zhang

DOI: 10.18280/ijht.350315

Detached eddy simulation of non-reacting swirling flow in a vortex burner

594-602

Zakaria Mansouri, Toufik Boushaki, Mokhtar Aouissi

DOI: 10.18280/ijht.350316

Thermo-hydraulic performance analysis of jet plate solar air heater under cross flow condition

603-610

Prashil D. Vinod, Shailendra N. Singh

DOI: 10.18280/ijht.350317

Hydrodynamics of residual oil droplet displaced by polymer solution in micro-channels of lipophilic rocks

611-618

Jiawei Fan, Yang Liu, Lili Liu, Shuren Yang

DOI: 10.18280/ijht.350318

Numerical study of nanofluid heat transfer SiO2 through a solar flat plate collector

619-625

Ammar Maouassi, Abdelhadi Baghidja, Said Daoud, Noureddine Zeraibi

DOI: 10.18280/ijht.350319

Effects of elbow structure of natural gas pipeline on condensation of water vapor

626-632

Xueqi Gao, Yuhou Zhu, Jianjun Wang, Youhai Jin

DOI: 10.18280/ijht.350320

Irreversibility analysis for a mixed convective flow of a reactive couple stress fluid flow through channel saturated porous materials

633-638

Anthony R. Hassan, Samuel O. Adesanya, Ramoshweu S. Lebelo, John A. Falade

DOI: 10.18280/ijht.350321

Numerical multiphysics modelling for the assessment of thermo-physical and energy performance of an advanced semi-opaque active façade

639-644

Balocco Carla, Petrone Giuseppe

DOI: 10.18280/ijht.350322

Theoretical investigation of a ceramic monolith heat exchanger using silicon carbide and aluminium nitride as heat exchanger material

645-650

Umayorupagam P. Arunachalam, Mohan Edwin

DOI: 10.18280/ijht.350323

Experimental and numerical study on the effect of the convergence angle, injection pressure and injection number on thermal performance of straight vortex tube

651-656

Mohammad B.M. Sadeghiazad

DOI: 10.18280/ijht.350324

Numerical investigation of three-dimensional separation control in an axial compressor cascade

657-662

Hayette Djedai, Ramzi Mdouki, Zakaria Mansouri, Mokhtar Aouissi

DOI: 10.18280/ijht.350325

CFD simulation and experimental study of water-oil displacement flow in an inclined pipe

663-667

Jieheng Zheng, Weiming Zhang, Junze Jiang, Rui Guo

DOI: 10.18280/ijht.350326

Experimental study on thermal performance of double circuit vortex tube (DCVT) - Effect of heat transfer controller angle

668-672

Mohammad B.M. Sadeghiazad

DOI: 10.18280/ijht.350327

Numerical simulation of the compressible flow in convergent-divergent nozzle

673-677

Souici Mohamed, Aouissi Mokhtar, T. Ben Chatti

DOI: 10.18280/ijht.350328

Modeling the interaction of coolant flows at the liquid-solid boundary with allowance for the laminar boundary layer

678-682

Yuriy Bіlonoga, Oksana Maksysko

DOI: 10.18280/ijht.350329

The simplified calculation model of pneumatic garbage transportation at acceleration period in horizontal straight pipe

683-687

Zheng Li, Jia Li, Wei Yang, Jingbo Liang

DOI: 10.18280/ijht.350330