Vol 28, No 2, December 2010

Similarity solution in stagnation-point flow with thermal radiation

3-6

Sin, V.K.

DOI: 10.18280/ijht280201

The oretical and numerical investigation on ship motion and propulsion in marine engineering

7-11

Biserni, C. ,De Luca, M. ,Lorenzini, E. ,Ragazzini, C.

DOI: 10.18280/ijht.280202

Numerical study on the effect of solidification parameters during the continuous casting of Al-Si alloys

13-17

Rihan, Y. ,Abd El-Bary, B.

DOI: 10.18280/ijht.280203

Comparative study of heat transfer during solidification of Phase Change Materials inside three different capsules

19-24

Teggar, M. ,Mezaache, E.-H. ,Benchatti, A. ,Zeghmati, B.

DOI: 10.18280/ijht.280204

Estimation of the unknown boundary heat flux in the inverse heat conduction problems

25-33

Ebrahimkhah, S.Email Author,Alizadeh, M.Email Author,Sh Mazidi, M.

DOI: 10.18280/ijht.280205

The parametric estimation of the unknown boundary heat flux in the inverse heat conduction problems

35-44

Ebrahimkhah, S.Email Author,Alizadeh, M.

DOI: 10.18280/ijht.280206

Transient natural convection flow of heat generating/absorbing fluid between infinite vertical parallel plates filled with porous material

45-52

Jha, B.K.^aEmail Author，Musa, M.K.^b

DOI: 10.18280/ijht.280207

Numerical modelling of boundary conditions for two dimansional conduction heat transfer equation using lattica boltzmann method

53-59

Chaabane, R.,Askri, F.,Nasrallah, S.B.

DOI: 10.18280/ijht.280208

A study of the thermo-elastic damage in the cylinder of an engine

61-69

Taher, B. ，Abboudi, S. ，Younes, R.

DOI: 10.18280/ijht.280209

Modeling and optimization of a C3MR LNG plant efficiency by change of mixed refrigerants' components

71-78

Saffari, H.Email Author，Fasihbeiki, M.

DOI: 10.18280/ijht280210

Unstructured control volume finite element method for coupled heat and mass transfer during the drying of porous medium having complex 2D-geometry

71-78

Khedher, N.B.Email Author,Nasrallah, S.B.

DOI: 10.18280/ijht.280211

MHD natural convection in iso-flux enclosures filled with porous medium

89-93

Al-Badawi, Y.,Duwairi, H.M.

DOI: 10.18280/ijht.280212

Local similarity solution of unsteady hydromagnetic convection flow of a micropolar fluid along a continuously moving permeable plate

95-105

Alam, M.S. ,Sattar, M.A. ,Rahman, M.M. ,Postelnicu, A.

DOI: 10.18280/ijht.280213

Magnetohydrodynamic thermo-solutal buoyant darcy convection in a square enclosure

107-118

Abishek, S.^aEmail Author,Katte, S.S.^b

DOI: 10.18280/ijht.280214

A two-dimensional, transient and isothermal model for the air cathode of pem fuel cells

119-124

Khemili, F.Email Author,Najjari, M.,Ben Nasrallah, S.

DOI: 10.18280/ijht.280215

Comparative study of two approaches for the prediction of the radiative heat transfer in a participating media subjected to a collimated radiation

125-130

Belhaj Ali, H.Email Author,Askri, F.,Ben Salah, M.,Ben Nasrallah, S.

DOI: 10.18280/ijht.280216

International journal of heat & technology: Life cycle assessment of advanced technologies for photovoltaic panels production

133-139

Bravi, M. ,Parisi, M.L. ,Tiezzi, E. ,Basosi, R.

DOI: 10.18280/ijht.280217

Numerical analysis of heat transfer induced by an horizontal ground heat exchanger in an heterogeneous soil

141-146

Bottarelli, M.

DOI: 10.18280/ijht.280218

Performance calculation for a vertical axis wind turbine with variable blade pitch

147-153

Gazzano, R. Email Author,Marini, M. Email Author,Satta, A.

DOI: 10.18280/ijht.280219

Definition, analysis and application of a Climatic Severity Index aimed at zoning the Italian territory for summer air conditioning of buildings

155-162

Terrinoni, L.,Signoretti, P.,Iatauro, D.,Romeo, C.,Federici, A.

DOI: 10.18280/ijht.280220

Tailored energy-use behaviour intervention initiatives

163-170

Shanks, K. ,MacPhaidin, A.

DOI: 10.18280/ijht.280220

Two graph methods for the evaluation of innovation in photovoltaic technology

171-175

Spena, A. Email Author,Di Tivoli, C. ,Serafini, A.

DOI: 10.18280/ijht.280220