Vol 25, No 1, June 2007

Numerical study of an axisymmetric vertical laminar jet charged with particles

1-8

Kortas, S. ,Mhiri, H. ,Le Palec, G. ,Bournot, P.

DOI: 10.18280/ijht250101

Compact heat exchangers optimization: Developing a model for the thermal-fluid dynamic sizing

9-18

Aquaro, D. Email Author,Pieve, M.

DOI: 10.18280/ijht.250102

Thermodynamic comparison of two processes of hydrogen production: - Steam methane reforming process - A solar thermochemical process

19-24

Gomri, R.,Bouzama, M.

DOI: 10.18280/ijht.250103

Investigation of the airflow patterns inside a room through the low Re k-ε model

25-31

Tripathi, B.,Moulic, S.G.

DOI: 10.18280/ijht.250104

Coupled heat and mass transfer in mixed convective flow of a non-newtonian fluid over a permeable surface embedded in a non-darcian porous medium

33-41

Chamkha, A.J.^aEmail Author,Ben-Nakhi, A.^b

DOI: 10.18280/ijht.250105

Application of ACFD approach to a system level thermal simulation

43-48

Hemanth, B.N.,Balaji, C.

DOI: 10.18280/ijht.250106

Scalar turbulence model investigation with variable turbulent prandtl number applies in hot axisymmetric turbulent round jet

49-56

Bensayah, K. ,Benchatti, A. ,Aouissi, M. ,Bounif, A.

DOI: 10.18280/ijht.250107

Les analysis for forces frequencies evaluation on a diverter

57-65

Di Nardo, A.Email Author，Langella, G.

DOI: 10.18280/ijht.250108

Computational and experimental prdiction of effictive draft temperature (EDT) inside the room

67-71

Jalil, J.M.,Saleh, A.A.M.

DOI: 10.18280/ijht.250109

On the prediction of drying rate in porous media

73-80

Haghi, A.K.Email Author,Ghanadzadeh, H.,Haghi, R.K.

DOI: 10.18280/ijht250110

Reduction of energy losses in a stirling engine

81-90

Timoumi, Y.,Tlili, I.Email Author,Nasrallah, S.B.

DOI: 10.18280/ijht.250111

Natural convection of a magnetohydrodynamic flow past a semi-infinite vertical porous plate in a porous medium with internal heat generation

91-94

Ferdows, M. Email Author,Kaino, K. Email Author,Crepeau, J.C.

DOI: 10.18280/ijht.250112

Free convection heat transfer enhancement between a vertical wall and air in the presence of pulsating aspirated and expired jets

95-101

Bartoli, C.

DOI: 10.18280/ijht.250113

Numerical analysis of fluid flow and heat transfer in microchannels

103-110

Amanifard, N.,Haghi, A.K.

DOI: 10.18280/ijht.250114

Thermoelastic stresses in inhomogeneous anisotropic solid in the presence of body force

111-117

Abd-Alla, A.M. ,El-Shahat, T.M. ,Fahmy, M.A.

DOI: 10.18280/ijht.250115

The caracteristics kinetics of convective drying processes (the variability effect of fluid thermo-physical properties on heat and mass transfer)

119-124

Mobarki, A. ,Ben Khadher, N. ,Ben Nasrallah, S.

DOI: 10.18280/ijht.250116

Computational investigation of the steady and unsteady flow field developed around a NACA0012 airfoil

125-129

Madani Yssad, H.,Azzi, A.,Abidat, M.

DOI: 10.18280/ijht.250117

dromagnetic natural convection in a partially heated cavity

131-136

Saravanan, S.，Abdul Hakeem, A.K.,Kandaswamy, P.

DOI: 10.18280/ijht.250118

Analysis of steady state heat transfer of compressed gas cooled-insulated power transformers using finite element technique

137-143

Eteiba, M.B. ,Abdel Aziz, M.M. ,Shazly, J.H.

DOI: 10.18280/ijht.250119

Forced convection of blasius flow of "second-grade" visco-elastic fluid

145-149

Shawaqfah, M.S. ,Damseh, R.A. ,Chamkha, A.J. ,Duwairi, H.M. ,Zgoul, M.H.

DOI: 10.18280/ijht.250120

Modeling of the wall friction coefficient for turbulent flow in smooth pipe with neural nets

151-156

Al-Salaymeh, A. Email Author,Ashhab, M.S.

DOI: 10.18280/ijht.250121

Shadowgraph visualizations of a submerged free slot jet of air

157-164

Gori, F. Email Author,Nino, E. ,Petracci, I.

DOI: 10.18280/ijht.250122