International Journal of Heat and Technology: Editorial
|
1-1
|
Lorenzini, E.
|
DOI: 10.18280/ijht180201
|
Thermodynamic optimization of geometry in environmental control systems for aircraft
|
3-10
|
Bejan, A.
|
DOI: 10.18280/ijht.180202
|
Natural convection in enclosures: Some considerations
|
11-15
|
Lorenzini, E.
|
DOI: 10.18280/ijht.180203
|
Investigation of the pulsatile pipe flow
|
17-22
|
Adamec, J.,Nozicka, J.,Korenar, J.
|
DOI: 10.18280/ijht.180204
|
Air natural convection between inclined parallel plates with uniform heat flux at the walls
|
23-45
|
Bianco, N.,Morrone, B.,Nardini, S.,Naso, V.
|
DOI: 10.18280/ijht180205
|
Three way catalyst life extension via catalyst mounting inversion: Full load conditions at different engine speeds
|
47-50
|
Arapatsakos, C.I.,Sparis, P.D.
|
DOI: 10.18280/ijht.180206
|
Performance of a power plant dual condensation steam condenser
|
51-58
|
Nageswara Rao, T.,Venkateshan, S.P.
|
DOI: 10.18280/ijht.180207
|
Liquid flow and heat transfer in microchannels: A review
|
59-68
|
Rostami, A.,Saniei, N.,Mujumdar, A.S.
|
DOI: 10.18280/ijht.180208
|
Radiative and convective heat transfer in a bidimensional channel with uniform wall heat flux
|
69-76
|
Bergero, S.
|
DOI: 10.18280/ijht.180209
|
Water evaporation into air-water vapor mixture and superheated steam. Effect of radiative heat transfer
|
77-90
|
Boukadida, N.,Nasrallah, S.B.
|
DOI: 10.18280/ijht180210
|
An air-conditioning system based on the reverse joule-brayton cycle
|
91-99
|
D'Orazio, M.C.,Cianfrini, C.,Corcione, M.
|
DOI: 10.18280/ijht.180211
|
A polydisperse model of the two-phase flow in a bubble column
|
101-113
|
Politano, M.,Carrica, P.M.,Bali?o, J.L.
|
DOI: 10.18280/ijht180212
|
Heat flux as a parameter for diagnostic and control of industrial thermal systems
|
115-122
|
Martins, N.,Afgan, N.H.,Carvalho, M.G.,Nogueira, M.
|
DOI: 10.18280/ijht180213
|