Current Issue

Vol 6, No 1, March 2019

Performance effects and economic viability of high-hydrated ethanol fumigation and diesel direct injection in a small compression ignition engine


Josimar S. Rosa, Giulio Lorenzini, Carlos R. Altafini, Paulo R. Wander, Giovani D. Telli, Luiz A.O. Rocha

DOI: 10.18280/mmep.060101

The impacts of heat generation/absorption and partial slip on boundary layer flow and heat transfer of a nanofluid comprising of self-impelled motile microorganisms passing a stretching sheet


Mohsen Izadi, Seyed Abdollah Mansouri Mehryan, Ali J. Chamkha, Giulio Lorenzini

DOI: 10.18280/mmep.060102

Heat and nanofluid transfer in baffled channels of different outlet models


Younes Menni, Ali J. Chamkha, Chafika Zidani, Boumédiène Benyoucef

DOI: 10.18280/mmep.060103

Makespan reduction using dynamic job sequencing combined with buffer optimization applying genetic algorithm in a manufacturing system


Sharath C.H. Somashekhara, Arun K.Y. Setty, Srinath M. Sridharmurthy, Poornima Adiga, Ulavathi S. Mahabaleshwar, Giulio Lorenzini

DOI: 10.18280/mmep.060104

A computational analysis for boundary layer flow of magneto hydrodynamic tangent hyperbolic fluid of heat and mass transfer past a stretching cylinder with suction/injection using spectral relaxation method


Munagala Venkata Subba Rao, Kotha Gangadhar, Giulio Lorenzini

DOI: 10.18280/mmep.060105

Investigation of energy saving in building by using phase-change materials (PCM)


Ali Mostafaei, Mojtaba Mirrzaei, Mahyar Ghazvini, Mohammad Hossein Ahmadi, Giulio Lorenzini

DOI: 10.18280/mmep.060106

Numerical analysis of heat and nanofluid mass transfer in a channel with detached and attached baffle plates


Younes Menni, Ali J. Chamkha, Chafika Zidani, Boumédiène Benyoucef

DOI: 10.18280/mmep.060107

Analysis of cylindrical shells by the Least Squares Method


Mohamed Kadri, Ahmed Sahli, Sara Sahli

DOI: 10.18280/mmep.060108

Experimental investigation on multi-cylinder SI engine fueled conventional gasoline, ethanol blends, and micro-emulsion as an alternative fuel


Ufaith Qadri, Mohhamad Marouf Wani

DOI: 10.18280/mmep.060109

Study of air flow around flat and arc-shaped baffles in shell-and-tube heat exchangers


Younes Menni, Ali J. Chamkha, Ahmed Azzi, Chafika Zidani, Boumédiène Benyoucef

DOI: 10.18280/mmep.060110

An indigenous tool (NoJavaCloud) to handle virtual nodes to simulate the cloud tasks


Thulasi Bikku

DOI: 10.18280/mmep.060111

Solar drying of drying agricultural product (Apricot)


Foued Chabane, Djamel Bensahal, Abdelhafid Brima, Noureddine Moummi

DOI: 10.18280/mmep.060112

The efficiency of the CORDIC Operator in the MIMO MC-CDMA receiver


Youness Mehdaoui, Abdessamad Malaoui, Ahmed Gaga, Rachid El Alami, Mostafa Mrabti

DOI: 10.18280/mmep.060113

A numerical investigation of natural convection heat transfer of copper-water nanofluids in a rectotrapezoidal enclosure heated uniformly from the bottom wall


Shantanu Dutta, Arup Kumar Biswas

DOI: 10.18280/mmep.060114

Research on the first passage of double-layer micro-plate in the piezoelectric model


Zhenzi Zhang, Ping Wang

DOI: 10.18280/mmep.060115

Mathematical modeling applied to renewable fishery management


Mst. Reshma Khatun, Md. Haider Ali Biswas

DOI: 10.18280/mmep.060116

How does aerodynamics influence physiological responses in middle-distance running drafting?


Fabien Beaumont, Fabien Bogard, Sébastien Murer, Guillaume Polidori, Farouk Madaci, Redha Taiar

DOI: 10.18280/mmep.060117

Diagnosis of causes for high railway traffic based on Bayesian network


Yingchao Zhou, Pinchao Meng

DOI: 10.18280/mmep.060118

Analytical solution of sea water steady magneto-hydrodynamic equations subjected to stretching sheet under induced magnetic field and heat transfer


Aly M. Abourabia, Sara A. Abdel Moneim

DOI: 10.18280/mmep.060119

The comparative thermodynamic analysis of compressor’s energetic performance


Cristian Eparu, Sorin Neacșu, Adrian Neacșa, Alina Prundurel

DOI: 10.18280/mmep.060120