Vol 35, No 1, March 2017

Numerical study of the chaotic flow in three-dimensional open geometry and its effect on the both fluid mixing and heat performances

1-10

Ahmed L. Boukhalkhal, Yahia Lasbet , Mohammed Makhlouf, Khaled Loubar

DOI: 10.18280/ijht.350101

Numerical analysis of natural convection in a triangular cavity with different configurations of hot wall

11-18

Manoj K. Triveni, Rajsekhar Panua

DOI: 10.18280/ijht.350102

Flat-rheology oil-based drilling fluid for deepwater drilling

19-24

Xin Zhao, Zhengsong Qiu, Jiangen Xu, Chao Zhao, Jian Gao

DOI: 10.18280/ijht.350103

Hydromagnetic bioconvection flow in the region of stagnation-point flow and heat transfer in non-Newtonian nanofluid past a moving surface with suction: similarity analysis

25-31

Govind R. Rajput, Vishwambhar S. Patil, J.S.V.R. Krishna Prasad

DOI: 10.18280/ijht.350104

Experimental research into the effects of abrasive characteristics on abrasive gas jet coal-breaking performance

32-36

Zhihui Wen, Yong Liu, Xiaotian Liu, Bochen Liang

DOI: 10.18280/ijht.350105

Influence of Hall and ion-slip currents on unsteady MHD free convective flow of a rotating fluid past an oscillating vertical plate

37-52

Jitendra K. Singh, Pratima Rohidas, Naveen Joshi, Shaikh G. Begum

DOI: 10.18280/ijht.350106

Effect of heat treatment temperature on the structure and tribological properties of nanometer lanthanum borate

53-58

Yue Wang, Daikuan Huang

DOI: 10.18280/ijht.350107

Numerical investigation of the simultaneous influence of swirling flow and obstacles on plate in impinging jet

59-66

Ebrahim Zeiny, Mousa Farhadi, Kurosh Sedighi

DOI: 10.18280/ijht.350108

Heat stress evaluation at the working face in hot coal mines using an improved thermos physiological model

67-74

Jiansong Wu, Ming Fu, Xing Tong, Yueping Qin

DOI: 10.18280/ijht.350109

Numerical simulation of fish meat freezing with considering temperature-dependent thermal properties

75-81

Farzad Sepahvandi, Hamid M. Heravi, Seyed R. Saleh

DOI: 10.18280/ijht.350110

Unsteady nanofluid flow over an inclined stretching surface with convective boundary condition and anisotropic slip impact

82-90

Ahmed M. Rashad

DOI: 10.18280/ijht.350111

Three-dimensional numerical simulation of flow around combined pier based on detached eddy simulation at high Reynolds numbers

91-96

Weizheng Cui, Xiantang Zhang, Zexi Li, Hui Li, Yan Liu

DOI: 10.18280/ijht.350112

Temperature analysis of dynamic catalytic convertor system with pre-catalyst in a multi cylinder spark ignition engine to reduce light-off time

97-102

Ganesan Mahadeven, Subramanian Sendilvelan

DOI: 10.18280/ijht.350113

Modified Mukherjee-Brill prediction model of pressure gradient for multiphase flow in wells

103-108

Yu Lei, Ruiquan Liao, Mengxia Li, Yong Li, Wei Luo

DOI: 10.18280/ijht.350114

Natural convection and entropy production in a cubic cavity heated via pin-fins heat sinks

109-115

Abdullah A.A.A. Al-Rashed, Lioua Kolsi, Hakan F. Oztop, Nidal Abu-Hamdeh, Mohamed Naceur Borjini

DOI: 10.18280/ijht.350115

Optimization of oxyhydrogen gas flow rate as a supplementary fuel in compression ignition combustion enginess

116-122

Ahmad H. Sakhrieh, Ahmad N. Al-Hares, Fawaz A. Faqes, Adel S. Al Baqain, Nizar H. Alrafie

DOI: 10.18280/ijht.350116

Molecular simulation research on the micro effect mechanism of interfacial properties of nano SiO2/meta-aramid fiber

123-129

Xu Li, Chao Tang, Qian Wang, Xiaoping Li, Jian Hao

DOI: 10.18280/ijht.350117

Comparison between different solar cooling thermally driven system solutions for an office building in Mediterranean Area

130-138

Furio Cascetta, Luca Cirillo, Alessandro Della Corte, Sergio Nardini

DOI: 10.18280/ijht.350118

Analysis on the effects of the shapes of flexible fluid-filled containers on their impact response

139-146

Yuantao Zhang, Weiming Zhang, Jie Guo, Jianyong Guo, Rui Guo

DOI: 10.18280/ijht.350119

A hybrid method of debris flow velocity estimation based on empirical equation

147-152

Shuwen Tian, Changming Wang, Zhimin Zhang

DOI: 10.18280/ijht.350120

Flow and thermal characteristics of jet impingement: comprehensive review

153-166

Anuj K. Shukla, Anupam Dewan

DOI: 10.18280/ijht.350121

Research on the effect of rotation and curvature on turbulence model and their application

167-176

Xin Jiang, Lei Zhang

DOI: 10.18280/ijht.350122

Influence of thermal-mechanical coupling effect on vibration of double-drive feed system

177-182

Jun Huang, Juntang Yuan, Zhenhua Wang

DOI: 10.18280/ijht.350123

Contribution to study the effect of exhaust gas recirculation EGR on HCCI combustion mode

183-190

Slimane Benhorma, Mokhtar Aouissi, C. Mansour, A. Bounif

DOI: 10.18280/ijht.350124

Water profiles in vertical slot fishways without central baffle

191-195

Guangning Li, Shuangke Sun, Haitao Liu, Tiegang Zheng, Chao Zhang

DOI: 10.18280/ijht.350125

Radiation effects on Williamson nanofluid flow over a heated surface with magnetohydrodynamics

196-204

Fazle Mabood, Sheikh M. Ibrahim, Giulio Lorenzini, Enrico Lorenzin

DOI: 10.18280/ijht.350126

Simulation of corrugated plate heat exchanger for heat and flow analysis

205-210

Muhammad Asif, H. Aftab, H.A. Syed, M.A. Ali, P.M. Muizz

DOI: 10.18280/ijht.350127

Preliminary evaluation of the expansion system size for a pressurized gas loop: application to a fusion reactor based on a helium-cooled blanket

211-218

Gianfranco Caruso, Matteo Nobili

DOI: 10.18280/ijht.350128

A general calculation model on the effect of main steam pressure variation on the coal consumption rate of steam turbines

219-224

Chao Sun, Qianying Li, Wei Lu, Xintong Liu, Bin Liu, Xiangxi Pei

DOI: 10.18280/ijht.350129

A comparison between electrocaloric and magnetocaloric materials for solid state refrigeration

225-234

Ciro Aprea , Adriana Greco, Angelo Maiorino , Claudia Masselli

DOI: 10.18280/ijht.350130