|
Numerical modelling of the thermal energy demand in Italian households through statistical data
|
381-390
|
|
Matteo Caldera, Giovanni Puglisi, Fabio Zanghirella, Paola Ungaro, Giuliano Cammarata
|
|
DOI: 10.18280/ijht.360201
|
|
A quasi-one-dimensional model for the centrifugal compressors performance simulations
|
391-396
|
|
Wenhai Du, Yucheng Li, Longfei Li, Giulio Lorenzini
|
|
DOI: 10.18280/ijht.360202
|
|
Effect of conjugate heat transfer on flow of nanofluid in a rectangular enclosure
|
397-405
|
|
Ishrat Zahan, Md A. Alim
|
|
DOI: 10.18280/ijht.360203
|
|
Measurement and correlation of excess molar enthalpies and vapor-liquid equilibria for alkanolamine-water system
|
406-410
|
|
Ruilei Zhang
|
|
DOI: 10.18280/ijht.360204
|
|
Variational approach to MHD stagnation flow of nanofluid towards permeable stretching sheet
|
411-421
|
|
Muthukumaran Chandrasekar, Malayampalayam S. Kasiviswanathan
|
|
DOI: 10.18280/ijht.360205
|
|
Study of hall current, radiation and velocity slip on hydromagnetic physiological hemodynamic fluid with porous medium through joule heating and mass transfer in presence of chemical reaction
|
422-432
|
|
Ravikumar Seelam
|
|
DOI: 10.18280/ijht.360206
|
|
One-way fluid-solid coupling analysis of subsurface safety valve plate
|
433-438
|
|
Meiqiu Li, Kang Yang, Junfeng Zhao, Jingbo Luo, Ning Li
|
|
DOI: 10.18280/ijht.360207
|
|
Effect of temperature dependent viscosity on ferrothermohaline convection saturating an anisotropic porous medium with Soret effect using the Galerkin technique
|
439-446
|
|
K. Raju
|
|
DOI: 10.18280/ijht.360208
|
|
Numerical study of mixed convection inside a three-dimensional ventilated cavity in the presence of an isothermal heating block
|
447-456
|
|
Hicham Doghmi, Btissam Abourida, Lahoucin Belarche, Mohamed Sannad, Meriem Ouzaouit
|
|
DOI: 10.18280/ijht.360209
|
|
A study on stratified air conditioning cooling load calculation model for a large space building
|
457-462
|
|
Ning Cai, Dongliang Zhang, Chen Huang
|
|
DOI: 10.18280/ijht.360210
|
|
Effects of the dimple geometry on the isothermal performance of a hydrodynamic textured tilting-pad thrust bearing
|
463-472
|
|
Mostefa Kouider, Souchet Dominique, Zebbar Djallel, Youcefi Abdelkader
|
|
DOI: 10.18280/ijht.360211
|
|
Heat source/sink and Newtonian heating effects on convective micropolar fluid flow over a stretching/shrinking sheet with slip flow model
|
473-482
|
|
Muhammad Kamran
|
|
DOI: 10.18280/ijht.360212
|
|
Exploitation potential of groundwater in Yangzhuang Basin, China under recharge enhancement
|
483-493
|
|
Xiaogang Fu, Zhonghua Tang, WenBin Lv, Xiaoming Wang, Baizhong Yan
|
|
DOI: 10.18280/ijht.360213
|
|
Radiation, dissipation and Dufour effects on MHD free convection Casson fluid flow through a vertical oscillatory porous plate with ion-slip current
|
494-508
|
|
K.V.B. Rajakumar, K.S. Balamurugan, M. Umasankara Reddy, Ch. V. Ramana Murthy
|
|
DOI: 10.18280/ijht.360214
|
|
Different shapes of Fe3O4 nanoparticles on the free convection and entropy generation in a wavy-wall square cavity filled by power-law non-Newtonian nanofluid
|
509-524
|
|
Mohammad Hatami
|
|
DOI: 10.18280/ijht.360215
|
|
Investigation of combustion and emissions of mixture of a wheat dust with binder pellet in a fixed-bed combustor
|
525-542
|
|
Saad A. El-Sayed, Mohamed K. El-Sayed
|
|
DOI: 10.18280/ijht.360216
|
|
Research on estimation of optical fiber probe gas holdup based on the adaptive weighted data fusion algorithm
|
543-547
|
|
Rui Li, Ruiquan Liao
|
|
DOI: 10.18280/ijht.360217
|
|
Analysis of vortical structures in a differentially heated lid driven cubical cavity
|
548-556
|
|
Hari P. Rani, Vekamulla Narayana, Yadagiri Rameshwar
|
|
DOI: 10.18280/ijht.360218
|
|
Simulation study of solar air collector with offset strip fin absorber plate for drying agricultural products in a semi-arid climate
|
557-568
|
|
Abdelouahab Benseddik, Ahmed Azzi, Rachid Khanniche, Abdul K. Allaf
|
|
DOI: 10.18280/ijht.360219
|
|
Speed stiffness characteristics of electro-hydro-mechanical system
|
569-574
|
|
Qingqing Tian, Lichen Gu
|
|
DOI: 10.18280/ijht.360220
|
|
Numerical heat transfer during Herschel–Bulkley fluid natural convection by CVFEM
|
575-584
|
|
Diego A. Vasco, Carlos Salinas, Nelson Moraga, Roberto Lemus-Mondaca
|
|
DOI: 10.18280/ijht.360221
|
|
Multiple slip effects on inclined MHD Casson fluid flow over a permeable stretching surface and a melting surface
|
585-594
|
|
Shalini Jain, Amit Parmar
|
|
DOI: 10.18280/ijht.360222
|
|
Thermal expansion effect on thickness-shear vibrations in a piezoelectric quartz filter with dot-ring electrodes
|
595-601
|
|
Xiangyang Li, Jing Liu
|
|
DOI: 10.18280/ijht.360223
|
|
Enhanced of thermoelectric properties and effects of Sb doping on the electrical properties of Tl10-xSbxTe6 nano-particles
|
602-606
|
|
Waqas M. Khan, Wiqar H. Shah, Sabir Khan, Sufaid Shah, Waqar A. Syed, Akif Safeen, Kashif Safeen
|
|
DOI: 10.18280/ijht.360224
|
|
Mixed convection flow in a vertical channel with temperature dependent viscosity and flow reversal: An exact solution
|
607-613
|
|
Basant K. Jha, Michael O. Oni
|
|
DOI: 10.18280/ijht.360225
|
|
Preparation, thermal insulation and flame retardance of cellulose nanocrystal aerogel modified by TiO2
|
614-618
|
|
Jing Luo, Hua Wang
|
|
DOI: 10.18280/ijht.360226
|
|
Natural convection in polyethylene glycol based molybdenum disulfide nanofluid with thermal radiation, chemical reaction and ramped wall temperature
|
619-631
|
|
Farhad Ali, Muhammad Arif, Ilyas Khan, Nadeem A.Sheikh, Muhammad Saqib
|
|
DOI: 10.18280/ijht.360227
|
|
Chloride diffusion analysis of reinforced concrete beam enhanced with externally bonded fibre reinforced polymer considering the presence of rebars and stirrups
|
632-642
|
|
Weilai Yao, Shiyong Jiang, Shuai Tao, Wei Fei
|
|
DOI: 10.18280/ijht.360228
|
|
Computational fluid dynamics comparison of separation performance analysis of uniform and non-uniform counter-flow Ranque-Hilsch Vortex Tubes (RHVTs)
|
643-656
|
|
Adib Bazgir, Nader Nabhani
|
|
DOI: 10.18280/ijht.360229
|
|
Application of liquid CO2 conveying technology for fire control in goaf
|
657-662
|
|
Kai Wang, Xiaowei Zhai, Jun Deng, Xiangrong Liu, Yanni Zhang
|
|
DOI: 10.18280/ijht.360230
|
|
An effective krill herd based optimal NN for parameter evaluation in Shell-And-Tube heat exchangers
|
663-671
|
|
Uttam Roy, Mrinmoy Majumder
|
|
DOI: 10.18280/ijht.360231
|
|
Numerical simulation of the effects of diaphragm length on potential flow around a circular cylinder with rear diaphragm
|
672-676
|
|
Bofeng Fan, Qingxiang Shui, Yuling Yang
|
|
DOI: 10.18280/ijht.360232
|
|
Parametric analysis and optimization of convective fin with variable thermal conductivity using semi-analytical solution
|
677-686
|
|
Vadivelu M. Arumugam, Ramesh K. Chidambaram
|
|
DOI: 10.18280/ijht.360233
|
|
Numerical simulation of pressure waves induced by high-speed maglev trains passing through tunnels
|
687-696
|
|
Yongxing Jia, Yuangui Mei
|
|
DOI: 10.18280/ijht.360234
|
|
Numerical investigation of pin-fin thermal performance for staggered and inline arrays at low Reynolds number
|
697-703
|
|
Biswaranjan Pati, Bishwajit Sharma, Ashutosh Palo, Rabindra Nath Barman
|
|
DOI: 10.18280/ijht.360235
|
|
Design of an intelligent rapid nozzle cleaning control system for fused deposition modelling 3D printers
|
704-708
|
|
Wei Wei, Ning Chen, Jiufeng Zhang, Xinyu Zhang
|
|
DOI: 10.18280/ijht.360236
|
|
Unsteady magnetohydrodynamic flow of some non-Newtonian fluids with slip through porous channel
|
709-713
|
|
Funmilayo H. Oyelami, Moses S. Dada
|
|
DOI: 10.18280/ijht.360237
|
|
Numerical investigation of cu-water nanofluid in a differentially heated square cavity with conducting solid square cylinder at center
|
714-722
|
|
Bishwajit Sharma, Basant Kumar, Rabindra Nath Barman
|
|
DOI: 10.18280/ijht.360238
|
|
Correlation analysis between orientation and energy consumption of semi-underground ski slope in hot summer and cold winter region
|
723-729
|
|
Zhi Wu, Chengjun Tang, Wei Zhang, Wenjuan Liu
|
|
DOI: 10.18280/ijht.360239
|
|
Experimental investigation of heat transfer in a vertical annulus with a bottom heated rotating inner cylinder
|
730-740
|
|
Muhammad F. Ejaz, Shehryar Manzoor
|
|
DOI: 10.18280/ijht.360240
|
|
Performance evaluation of solar air heater equipped with louvered fins
|
741-751
|
|
Subhash Chand, Prabha Chand
|
|
DOI: 10.18280/ijht.360241
|
|
Heat and humidity features and energy saving potential of temperature and humidity independent control air-conditioning system using refrigerant mixture
|
752-760
|
|
Pengfei Yu, Xiaosong Zhang
|
|
DOI: 10.18280/ijht.360242
|
|
Circular heat and solute source within a viscoplastic porous enclosure: The critical source dimension for optimum transfers
|
761-772
|
|
Karim Ragui, Abdelkader Boutra, Youb Khaled Benkahla, Rachid Bennacer
|
|
DOI: 10.18280/ijht.360243
|
