Vol 36, No 1, March 2018

The study of three dimensional radiative MHD Casson nanofluid over an exponential porous stretching sheet with heat source under convective boundary conditions


Prathi V. Kumar, Shaik M. Ibrahim, Giulio Lorenzini

DOI: 10.18280/ijht.360101

Specific features of heat exchangers calculation considering the laminar boundary layer, the transitional and turbulent thermal conductivity of heat carriers


Yuriy Bіlonoga, Oksana Maksysko

DOI: 10.18280/ijht.360102

Effect of sand as thermal damper integrated in flat plate water solar thermal collector


Amine T. Benhouia, Mohamed Teggar, Ahmed Benchatti

DOI: 10.18280/ijht.360103

Numerical simulation of transient heat transfer in friction-stir welding


Mehmet T. Pamuk, Atilla Savaş, Ömer Seçgin, Emrah Arda

DOI: 10.18280/ijht.360104

Study on critical speed of rotation in the multistage high speed centrifugal pumps rotors


Yabin Tian, Anjie Hu

DOI: 10.18280/ijht.360105

Numerical analysis of heat transfer and friction factor in two-pass channels with variable rib shapes


Arjumand Rasool, Adnan Qayoum

DOI: 10.18280/ijht.360106

The dynamic evolution model and experimental study of gas permeability under multiple factors


Guangzhong Sun, Runlin Zhang, Kunyun Tian

DOI: 10.18280/ijht.360107

MHD Powell–Eyring fluid flow with non-linear radiation and variable thermal conductivity over a permeable cylinder


Amit Parmar, Shalini Jain

DOI: 10.18280/ijht.360108

Wind tunnel test study on the influence of railing ventilation rate on the vortex vibration characteristics of the main beam


Xin Cui, Liang Gao, Jian X. Liu

DOI: 10.18280/ijht.360109

Combined heat and mass transfer in mixed convection through a horizontal tube


Aicha Bouhezza, Omar Kholai, Saadoun Boudebous, Zoubir Nemouchi

DOI: 10.18280/ijht.360110

Features and mechanism of abrasive water jet cutting of Q345 steel


Xiaochen Chen, Jinfa Guan, Songsheng Deng, Qiang Liu, Ming Chen

DOI: 10.18280/ijht.360111

CFD study of ventilation for indoor multi-zone transformer substation


Mohamad Kanaan, Khaled Chahine

DOI: 10.18280/ijht.360112

Evaluating the cleaning performance of rectangular slot nozzle and diffuser


Haixia Li, Zhendong Hao, Qi Zhang

DOI: 10.18280/ijht.360113

Investigation on heat transfer characteristics of roughened solar air heater using ANN technique


Harish K. Ghritlahre, Radha K. Prasad

DOI: 10.18280/ijht.360114

Numerical simulation and analysis of the effect of baffle distance and depth on solid-liquid two-phase flow in circular secondary clarifier


Fang He, Jian Wang, Wei Chen

DOI: 10.18280/ijht.360115

Emissions control and performance evaluation of spark ignition engine with oxy-hydrogen blending


Vemula M. Krishna

DOI: 10.18280/ijht.360116

Thermal control design and experimental verification of light off-axis space optical remote sensor in the sun-synchronous orbit


Fengwei Guan, Feng Zhang, Nailiang Cao, Qiang Liu, Ju Liu, Shanmeng Yu, Hongyu Guan

DOI: 10.18280/ijht.360117

Comparisons of LPDF and MEPDF for lifted H2/N2 jet flame in a vitiated coflow


Ahmed A. Larbi, Abdelhamid Bounif, Mohamed Bouzit

DOI: 10.18280/ijht.360118

Analysis of asphalt wettability based on spreading radius


Peng Tian, Lei Nie, Gaofeng Zhan

DOI: 10.18280/ijht.360119

Energy and exergy analysis of parabolic trough collectors


Omid K. Sadaghiyani, Mohsen S. Boubakran, Amir Hassanzadeh

DOI: 10.18280/ijht.360120

Characteristic analysis of gas & solid phase flow in oil shale pyrolysis circulating fluidized bed


Mingshu Chi, Qing Wang, Hongpeng Liu, Zhichao Wang, Qi Liu

DOI: 10.18280/ijht.360121

Theoretical modeling and optimization of microchannel heat sink cooling with TiO2-water and ZnO-water nanofluids


Sayantan Mukherjee, Purna C. Mishra, Paritosh Chaudhuri, Gourab Banerjee

DOI: 10.18280/ijht.360122

Experimental research of the mechanism and particle flow in screw conveyer


Meiqiu Li, Jingbo Luo, Bangxiong Wu, Jian Hua

DOI: 10.18280/ijht.360123

Mass transfer enhancement in a three-phase fluidized bed electrochemical reactor


Gajulapalli V.S.K. Reddy, Kasala V. Ramesh

DOI: 10.18280/ijht.360124

Detection of ball grid array solder joints based on adaptive template matching


Xueli Hao, Wei Li, Zhaoyun Sun, Shaojun Zhu, Shuai Yan, Zhao Zhao

DOI: 10.18280/ijht.360125

Suitability of magnetic nanofluid in heat transfer loops


Praveena Devi N., Ch. Srinivasa Rao, Kiran Kumar K.

DOI: 10.18280/ijht.360126

Based on FDM numerical simulation research on the factors influencing heat release in wet airway


Xuebo Zhang, Ming Yang

DOI: 10.18280/ijht.360127

Effects of dual stratification on non-orthogonal non-Newtonian fluid flow and heat transfer


Ganganapalli Sarojamma, Kata Sreelakshmi, Kuppalapalle Vajravelu

DOI: 10.18280/ijht.360128

Numerical analysis of droplet atomization in wet electrostatic precipitator based on computational particle-fluid dynamics


Feng Liu

DOI: 10.18280/ijht.360129

Heat transfer characteristics of MWCNT nanofluid in rectangular mini channels


Asif Afzal, A.D. Mohammed Samee, R.K. Abdul Razak, M.K. Ramis

DOI: 10.18280/ijht.360130

Atmospheric sulfuric acid leaching thermodynamics from metallurgical zinc-bearing dust sludge


Jinxia Zhang, Weiguang Sun, Fusheng Niu, Long Wang, Yawei Zhao, Miaomiao Han

DOI: 10.18280/ijht.360131

Numerical investigation of conjugate natural convection heat transfer in a square porous cavity heated partially from left sidewall


Khaled Al-Farhany, Ammar Abdulkadhim

DOI: 10.18280/ijht.360132

Supercritical cyclic steam stimulation of wellbore temperature and pressure distribution in Lukeqin oilfield


Jun Zhang, Nini Liu

DOI: 10.18280/ijht.360133

Thermal and cost analysis of float and various tinted double window glass configurations on heat gain into buildings of hot & dry climatic zone in India


Kirankumar Gorantla, Saboor Shaik, Ashok Babu Talanki Putta Ranga Setty

DOI: 10.18280/ijht.360134

Research on resistance features of plate heat exchanger based on flow distribution


Yong Sun, Jiayu Rong, Yanan Tian, Yanxu Niu, Menghao Zhang

DOI: 10.18280/ijht.360135

Numerical investigation of pressure drop and heat transfer in pin fin heat sink and micro channel pin fin heat sink


Venkatesh Saravanan, C.K. Umesh, Doddamani Hithaish, Kanakanahalli Seetharamu

DOI: 10.18280/ijht.360136

Research on thermal performance of external thermal insulation composite concrete wall block


Chenghua Zhang, Jisheng Qiu, Xiao Guan, Piji Hou, Wei Huang

DOI: 10.18280/ijht.360137

Thermal, effective and exergetic analysis of double flow packed bed solar air heater


Saket Kumar, Abhishek Priyam, R.K. Prasad

DOI: 10.18280/ijht.360138

Thermal environment adaptability design of space-based infrared imaging system


Qinglong Hu, Guangwei Shi, Fan Jiang, Huaide Zhou, Zhaohui Li, Liang Yang, Xuejun Zhang

DOI: 10.18280/ijht.360139

A comparative study for simulating heat transport in large district heating networks


Kevin Sartor, David Thomas, P. Dewallef

DOI: 10.18280/ijht.360140

Experimental analysis and numerical simulation of variable mass flow in horizontal wellbore


Jing Wen, Ming Yang, Weilin Qi, Jing Wang, Qian Yuan, Wei Luo

DOI: 10.18280/ijht.360141

Mathematical modeling of two-phase media heat transfer coefficient in air cooled condenser systems


Yanán C. Medina, Nislan H. Khandy, Ken M. Carlson, Oscar M.C. Fonticiella, Osvaldo F.C. Morales

DOI: 10.18280/ijht.360142

On hydromagnetic flow of a second-grade fluid induced by an inclined plate


Bibhash Deka, Rita Choudhury

DOI: 10.18280/ijht.360143

Numerical simulation and experimental verification of mulch spreading system of paddy field based on CFD


Xiaoze Yu, Mingjin Xin, Yuqiu Song, Jia Xu, Wentao Ren

DOI: 10.18280/ijht.360144

Enhanced heat transfer by thermosyphon method in electronic devices


K. Gopi Kannan, R. Kamatchi, T. Venkatajalapathi, A.S. Krishnan

DOI: 10.18280/ijht.360145

Numerical investigation on the effect of variation of water level on the stability of soil-cement column reinforced waterway side slope


Li’e Yan, Nianping Yi, Xingui Zhang, Shengcai Xu

DOI: 10.18280/ijht.360146

Heat transfer of the TiO2/water nanofluid in an annulus of the finite rotating cylinders


M. R. A. Rahman, M. R. Saad, A. C. Idris, H. M. Faizal

DOI: 10.18280/ijht.360147

Detached eddy simulation of compressible flow with rapid expanded divergent contour


Khaled Bensayah, El-Ahcene Mahfoudi

DOI: 10.18280/ijht.360148

Optimal diameters of triple concentric-tube heat exchangers


Achour Touatit, Cherif Bougriou

DOI: 10.18280/ijht.360149

Analysis of wind resistance of high-rise building structures based on computational fluid dynamics simulation technology


Chunming Liu, Liang Liu, Chengbin Liu

DOI: 10.18280/ijht.360150