Vol 29, No 2, December 2011

The application of nanofluids on three dimensional mixed convection heat transfer in equilateral triangular duct


Mohammed, H.A. , Om, N.I. , Shuaib, N.H. , Hussein, A.K. , Saidur, R.

DOI: 10.18280/ijht290201

The fuel mixtures of gasoline-alcohols and their influence on air and water


Arapatsakos, C.

DOI: 10.18280/ijht.290202

Coupled numerical approach for combined mode of heat transfer


Chaabane, R.,Askri, F.,Nasrallah, S.B.

DOI: 10.18280/ijht.290203

Permeability effect on sound wave propagation in saturated porous layer lied over flat plate


Batarseh, L.R.,Duwairi, H.M.

DOI: 10.18280/ijht.290204

COupled conduction-radiation heat transfer problem for three-dimensional complex geometry


Grissa, H.,Askri, F.,Ben Salah, M.,Ben Nasrallah, S.

DOI: 10.18280/ijht.290105

Effects of thermal radiation and mass transfer on mhd unsteady flow through a porous medium bounded by two porous horizontal


Kumar, N.Email Author,Gupta, S.Email Author,Jain, T.

DOI: 10.18280/ijht.290206

Thermal instability of compressible rivlin-ericksen rotating fluid permeated with suspended dust particles in the presence of vertical


Rana, G.C.Email Author,Patial, M.

DOI: 10.18280/ijht.290207

Heat transfer and flow field investigation of a heat exchanger for aero engine applications


Missirlis, D. ,Flouros, M. ,Yakinthos, K.

DOI: 10.18280/ijht.290208

Identification of thermo-physical properties of solids using power measurements


Mzali, F.Email Author,Nasr, A.,Albouchi, F.,Nasrallah, S.B.

DOI: 10.18280/ijht.290209

Mixed convection flow in a vertcal annulus filled with porous material having variable porosity


Kaurangini, M.L. ,Jha, B.K.

DOI: 10.18280/ijht290210

Analytical prediction for slip flow-heat transfer in microtube and parallel plate microchannel including viscous dissipation


Mecili, M.Email Author,Mezaache, E.

DOI: 10.18280/ijht.290211

Fuzzy control system for recovering direction after spinning


Piancastelli, L. Email Author,Frizziero, L. ,Marcoppido, S. ,Donnarumma, A. ,Pezzuti, E.

DOI: 10.18280/ijht.290212

Active antiskid system for handling improvement in motorbikes controlled by fuzzy logic


Piancastelli, L.aEmail Author,Frizziero, L. ,Marcoppido, S. ,Donnarumma, A. ,Pezzuti, E.

DOI: 10.18280/ijht.290213

Innovative calculation methods of the magnetic field from single and double-circuit twisted three-phase cables used for the connection of renewable sources to the grid


Mazzanti, G.,Landini, M.,Kandia, E.

DOI: 10.18280/ijht.290214

Optimal heat conductance distribution for power optimization of irreversible ifgt cycles


Ma, Z. ,Wu, J.

DOI: 10.18280/ijht.290215

The influence of natural gas in a four-stroke engin


Arapatsakos, C.

DOI: 10.18280/ijht.290216

The use of vegetable oils us fuel on diesel engine


Arapatsakos, C.Email Author,Christoforidis, D.,Karkanis, A.

DOI: 10.18280/ijht.290217

The score project: Stove for cooking, refrigeration and electricity


Dennis, R. ,Pullen, K.R. ,Vocale, P.

DOI: 10.18280/ijht.290118

Payback period for a ground-source heat pump system(Conference Paper)


Bottarelli, M.Email Author,Gabrielli, L.

DOI: 10.18280/ijht.290219

Experimental assessment and modeling of energy conversion effectiveness in a gasification power plant


Allesina, G.Email Author,Pedrazzi, S.,Cattini, C.

DOI: 10.18280/ijht.2902120

New initiatives on energy efficiency funded by the intelligent energy europe programme


Ferioli, F.,Coudun, C.

DOI: 10.18280/ijht.290221

Life cycle assessment of gratzel-type cell production for non conventional photovoltaics from novel organic dyes


Parisi, M.L. ,Sinicropi, A. ,Basosi, R.