Fluid dynamic feasibility study of solar chimney in residentail buildings
|
1-5
|
Coppi, M.,Quintino, A.,Salata, F.
|
DOI: 10.18280/ijht290101
|
Unsteady couette flow in parallel plates filled with porous material with suction/injection
|
7-12
|
Jha, B.K ,Kaurangini, M.L.
|
DOI: 10.18280/ijht.290102
|
The function estimation of the unknown boundary heat flux in the inverse heat conduction problems
|
13-23
|
Ebrahimkhah, S.Email Author,Alizadeh, M.Email Author,Mazidi, M.Sh.
|
DOI: 10.18280/ijht.290103
|
The use of vegetable oils us fuel on diesel engine
|
25-31
|
Arapatsakos, C.Email Author,Christoforidis, D.,Karkanis, A.
|
DOI: 10.18280/ijht.290104
|
Equilibrium heat and moisture transfer in soils with heat sources
|
33-38
|
Galli, G.,Vallati, A.
|
DOI: 10.18280/ijht.290105
|
Unsteady heat transfer in steady stagnation point flow along stretching sheet in the presence of free stream
|
39-44
|
Sharma, P.R. ,Singh, G. ,Chamkha, A.J.
|
DOI: 10.18280/ijht.290106
|
Experiment study on a direct evaporative cooling air conditioner in Xi'an city
|
45-48
|
Qiang, T., Huang, X., Wu, J.
|
DOI: 10.18280/ijht.290107
|
Simulation of internal transponder's temperature
|
49-53
|
Ruzicka, M.,Kunzel, G.
|
DOI: 10.18280/ijht.290108
|
Isentropic sound propagation analysis and optimization over flat plate of saturated porous media with variable permeability
|
55-61
|
Batarseh, L.R., Duwairi, H.M.
|
DOI: 10.18280/ijht.290109
|
Design, construction and test of a multipurpose drier using biomass as solid fuel: Application to drying fish
|
63-68
|
Kemajou, A. ,Nganya, T. ,Mba, L. ,Azebaze, A.
|
DOI: 10.18280/ijht290110
|
Effect of magnetic field on boundary layer flow over an unsteady streching surface in a micropolar fluid
|
69-74
|
Elbashbeshy, E.M.A.aEmail Author,Bazid, M.A.A.bEmail Author,Aldawody, D.A.
|
DOI: 10.18280/ijht.290111
|
Hydrodynamics and thermal behaviors of fluid flow between two rotating micro-concentric cylinders
|
75-82
|
Al-Shyyab, A. Email Author,Khadrawi, A.F.
|
DOI: 10.18280/ijht.290112
|
The influence of natural gas in a four-stroke engin
|
83-89
|
Arapatsakos, C.
|
DOI: 10.18280/ijht.290113
|
MHD forced convection and entropy generation in a circular channel occupied by hyper porous medium
|
91-100
|
Kumar, N.Email Author,Gupta, S.
|
DOI: 10.18280/ijht.290114
|
The fuel temperature impact in the diesel engine when mixtures of diesel - Soy oil are used as fuel
|
101-105
|
Arapatsakos, C.Email Author,Christoforidis, D.,Karkanis, A.
|
DOI: 10.18280/ijht.290115
|
The fuel temperature influence in diesel engine using as fuel mixtures of diesel & olive seed oil
|
107-111
|
Arapatsakos, C.Email Author,Christoforidis, D.,Karkanis, A.
|
DOI: 10.18280/ijht.290116
|
An analytical approach to solve a cross flow heat exchanger for unmixed hot and cold media
|
113-118
|
Sarma, P.K., Radhakrishna, D., Srinivas, V., Dharma Rao, V., Ramnaryanan, C.P.
|
DOI: 10.18280/ijht.290117
|
A study of the thermo-elastic damage in the cylinder of an engine
|
119-127
|
Taher, B. ,Abboudi, S. ,Younes, R.
|
DOI: 10.18280/ijht.290118
|
Air flow velocity prediction by inverting a hot-wire anemometer neural net model
|
129-134
|
Ashhab, M.S. Email Author, Ai-Salaymeh, A. Email Author, Abdelkader, M.R.
|
DOI: 10.18280/ijht.290119
|
Application of inverse method to the problem of thermal contact conductance estimation using simulated measured temperatures
|
135-141
|
Shojaeefard, M.H. ,Mazidi, M.Sh. Email Author,Shojaeefard, H. ,Mazidi, M.
|
DOI: 10.18280/ijht.290120
|
Mixed convection in a tilted lid-driven square enclosure with adiabatic cylinder at the center
|
143-156
|
Saha, S. ,Hussein, A.K. Email Author,Saha, G. ,Hussain, S.H.
|
DOI: 10.18280/ijht.290121
|
Study of beta type Stirling engine - Validity of the perfect gas assumption
|
157-163
|
Gheith, R.,Aloui, F. ,Ben Nasrallah, S.
|
DOI: 10.18280/ijht.290122
|
Role of surface roughness in pool boiling with Alumina-water nanofluid on a horizontal wire surface
|
165-171
|
Hegde, R.N. Email Author,Rao, S.S. Email Author,Reddy, R.P.
|
DOI: 10.18280/ijht.290123
|
Study of beta type Stirling engine - Validity of the perfect gas assumption
|
157-163
|
Gheith, R. ,Aloui, F. ,Ben Nasrallah, S.
|