Vol 26, No 2, December 2008

Parametric study of flow through engine exhaust port using CFD


Rao, G.U., Murali, S., Marathe, N.V., Murthy, K.M.

DOI: 10.18280/ijht260201

The investigation of microdevice performance by transient heat transfer simulation


Najafi, J.G., Saboonchi, A.

DOI: 10.18280/ijht.260202

Numerical optimization of a thermal performance of a phase change material based heat sink


Faraji, M., El Qarnia, H.

DOI: 10.18280/ijht.260203

Heat and mass transfer during drying process


Helel, D.E., Boukadida, N.

DOI: 10.18280/ijht.260204

Experimental study on fluid flow and heat transfer from a triangular prism approaching the wall of a wind tunnel (Reynolds number = 2.6×104)


Chakrabarty, D., Brahma, R.

DOI: 10.18280/ijht.260205

Designing of an extrusion head for semolina pasta production with numerical simulation


Fabbri, A., Lorenzini, G.

DOI: 10.18280/ijht.260206

Computational modelling of heat transfer in a partially partitioned enclosure


Aminossadati, S.M., Ghasemi, B.

DOI: 10.18280/ijht.26207

Influence of air thermohygrometric properties on mechanical draft evaporative towers: A calculation method to predict effects in power plants and refrigerating absorption machines


Baldinelli, G., Asdrubali, F.

DOI: 10.18280/ijht.260208

Superheated steam and humid air drying of a packed bed of porous particles: Theoretical study


Sghaier, J., Messai, S., Belghith, A.

DOI: 10.18280/ijht.260209

Turbulent convective heat transfer characteristics of nano fluid in a circular tube


Sarm, P.K., Kedarnath, C., Ramanarayanan, C.P., Kishore, P.S., Rao, V.D., Ramakrishna, K., Srinivas, V.

DOI: 10.18280/ijht260210

MHD oscillatory free convective flow past a vertical plate in slip-flow regime with variable suction and periodic plate temperature


Ahmed, N., Kalita, D.

DOI: 10.18280/ijht.260211

An experimental study to evaluate pressure drop loss coefficient of the condenser in a under water weapon


Sarma, P.K., Ramanarayanan, C.P., Kedarnath, C., Kishore, P.S., Rao, V.D., Sharma, K.V.

DOI: 10.18280/ijht.260212

Numerical study of combined natural convection, conduction and surface radiation heat transfer in open top, side vented cavities


Singh, S.N.

DOI: 10.18280/ijht.260213

Economical study by determining the optimum thickness of insulation of some heaters utilized in Qatar refinery


Al-Khawaja, M.J.

DOI: 10.18280/ijht.260214

Effect of heat generation/absorption on heat transfer for a non-Newtonian fluid


Al-Hamad, M., Duwairi, H.M.

DOI: 10.18280/ijht.260215

Unsteady magnetohydrodynamic two fluid flow and heat transfer in a horizontal channel


Umavathi, J.C., Chamkha, A.J., Mateen, A., Kumar, J.P.

DOI: 10.18280/ijht.260216

Experimental investigation on thermal performance of a novel heat pipe cold plate


Ma, Z., Yao, S.

DOI: 10.18280/ijht.260217

A boubaker polynomials solution to heat equation for monitoring A3 point evolution during resistance spot welding


Slama, S., Bouhafs, M., Ben Mahmoud, K.B.

DOI: 10.18280/ijht.260218

Incompressible viscous flow in a porous medium enclosed by two rotating discs


Kiwan, S.M., Aldoss, T.K., Almomani, E.M.

DOI: 10.18280/ijht.260219

Experimental investigation on the thermal behaviour and performance of an axially grooved heat pipe


Lataoui, Z., Romestant, C., Bertin, Y., Jemnp, A., Petit, D.

DOI: 10.18280/ijht.260220

A simplistic way for cooling an intermittent operating internal combustion engine


Khadrawi, A.F., Al-Nimr, M.A.

DOI: 10.18280/ijht.260221